Font Size  S M L
   
Search Results; Data Description/Search Results Page
The information related to selected substance is displayed in a tree format.
You can switch the display by clicking "Excluding blank data" or "Including blank data". By default, the excluding blank data will be displayed.
Item Operation
"-" button Close the lower items
"+" button Open the lower items Display the optional page
"Data Description" link Display the description of the search result on another page
"related site link" link Display the related site on another page
Downloading the search results
If you click "Downloading the search results" link, the list of search results in TSV format (tab separated values format) will be downloaded.
General Information
General Information
AJCSD ID
The AJCSD ID is a unique number assigned to a chemical by AJCSD.
CAS Registry No.
The CAS Registry number is a unique number assigned to a chemical by the Chemical Abstracts Service, which is an organization of the American Chemical Society.
Chemical Substance Name
The Chemical Substance Name corresponding to a CAS Registry No. is displayed.
Molecular Formula
The molecular formula for a substance is displayed.
SMILES
SMILES for a substance is displayed. This SMILES is created by ChemDraw.
Structure
According to a CAS registry number entered, the 2-D depiction of the corresponding chemical structure will be displayed. A typical structure would be shown if the number retrieved multiple answers. Alternatively, a typical structure of the constituent in mixtures, etc. would be displayed if the number failed to specify a single chemical structure.
Synonym
Another names are displayed.
When another name is not registered in CHRIP, this item in itself is not displayed.
Notes on CAS RN
Updated: 2024-09-10
"Notes on CAS RN" provides information on the results of verification performed by the Chemical Abstracts Service (CAS) under the CAS Registry Numbers® （CAS RN®）* licensing program.
*CAS RN®are the intellectual property of the American Chemical Society; and are used by National Institute of Technology & Evaluation with the express permission of CAS.
Notes
Information about the results of the validation will be displayed.
　　　　CAS RNロゴ
When the CAS RN has been replaced by another number, it will be displayed as follows.
(ex.) When CAS RN A has been replaced by CAS RN B;
CAS RN A: This CAS RN has been replaced by CAS RN B.
CAS RN B: The CAS RN before replacement had been CAS RN A.
When there is the CAS RN to be used preferentially, it will be displayed as follows.
(ex.) When CAS RN A and CAS RN B are the same substance, but CAS RN A is used preferentially;
CAS RN A: The preferred CAS RN is CAS RN A, while CAS RN B is the non-preferred CAS RN.
CAS RN B: The preferred CAS RN is CAS RN A and CAS RN B is the non-preferred CAS RN.
When the CAS RN has been created in error during the substance indexing process and subsequently deleted, etc., it will be displayed as follows.
(ex.) This CAS RN has been deleted and not replaced.
When the substance has not been indexed and the CAS RN has been missing, it will be displayed as follows.
(ex.) This CAS RN not found - may be invalid.
When the CAS RN has not been verified, it will be displayed as follows.
(ex.) This CAS RN has not been verified by CAS and may be inaccurate.
Remarks
Remarks will be displayed.
Laws and Regulations
Cambodia
Law on Controlling of Drugs, 2012
Laws and regulations Overview
The Law aims to protect the public health from drugs, and lays down the measure for controlling of drug and provides the list of prohibited and restricted chemicals that can be used as a drug for medical, pharmaceutical sector as also the table of precursors can be used in industrial manufacturing sector which under the responsibility of the Ministry of Health and the Ministry of Industry and Handicraft respectively.
Article 14: Ministry of Health has been authorized by the Government for providing license or permission and controlling of all legal activities related to drugs as listed in table I, II and III as annex of the Law.
Article 15: Ministry of Industry and Handicraft has been authorized by the Government for providing license or permission and controlling of all legal activities related to drugs as listed in table IV for industrial sector.
Category
- TableⅣ(Ⅰ)
- TableⅣ(Ⅱ)
Law on Management of Strong Acid, 2011
Laws and regulations Overview
The Law aims to cover strong acids with pH?3that harmful to the public health, and regulate the producing, packaging, transportation, storage, handling of strong acids. Article 9: All kind of strong acids as listed in annex of the Law have been permitted for the purpose of use in industries and handicraft, health sector, agriculture, science, techniques, testing, laboratory and for other sector that benefit for society.
Prakas No 110 MIME on Management and Control of Use, Importation, Exportation and Distribution of Chemical Substances in Industrial Sector, 2004
Laws and regulations Overview
This ministerial regulation listed 35 precursors that need to have permission from the Ministry of Industry and Handicraft (former MIME). All chemicals need to have label and packaging which complied to safety rule.
Prakas No 484, 2012 on The List of Agricultural Pesticides in the Kingdm of Cambodia (under the Law on the Management of Pesticides and Fertilizers, 2012, MAFF)
Laws and regulations Overview
This Prakas, Ministerial Regulation aims to define the list of Agriculrure Pesticides in the Kingdom of Cambodia. Annex1 of Prakas No 484, 2012 on The List of Agricultural Pesticides in the Kingdm of Cambodia "List of Banned Pesticides"
Indonesia
Government Regulation of the Republic of Indonesia Number 74 Year 2001 regarding Hazardous and Toxic Materials Management
Laws and regulations Overview
The regulation of hazardous and toxic materials intent to prevent and or reduce the risk of impact hazardous and toxic materials on the environment, human health and other living things. This regulation mandates the registration of hazardous and toxic materials which are intended to be manufactured or imported to Indonesia. Materials hazardous and toxic management are not included in the scope of government regulation is the management of radioactive materials, explosives, mining and production of oil and gas and their processed products, food and beverages and other food additives, household health supplies and cosmetics, pharmaceutical ingredients, narcotics, psychotropic substances and precursors, as well as other addictive substances, chemical weapons and biological weapons
Category
- Usable hazardous and toxic materials
- Limited use hazardous and toxic materials
- Banned use hazardous and toxic materials
Regulation of Minister of Trade of the Republic of Indonesia Number 75 Year 2014 regarding The Second Amandment of Minister of Trade Number 44 Year 2009 Regarding Provision, Distribution and Control fo Hazardous Substances
Laws and regulations Overview
This regulation governing the types of hazardous substances is restricted import, distribution and monitoring.
Law Number 9 Year 2008 regarding the Use of Chemicals and Prohibition of the Use of Chemicals for Chemical Weapons
Laws and regulations Overview
Arrangements regarding the use of chemicals and prohibition the use of chemicals as chemical weapons aimed at preventing and combating the misuse of chemicals as chemical weapons. This regulation mandates everyone who create, produce, possess, store, transfer or use of schedule 1, schedule 2 and schedule 3 chemicals shall submit a report at least once a year. Any person who produces unscheduled discrete organic chemicals in limited amount to be declared shall submit a report to minister. Everyone who has a factory facilities producing schedule 1, schedule 2, schedule 3 chemicals and unscheduled discrete organic chemicals shall submit a report to the minister.
Regulation of Minister of Industry of Republic of Indonesia Number 41 Year 2014 regarding Prohibiton the Use of Hydrochlorofluorocarbon (HCFCs) in the Field of Industry
Regulation of Minister of Trade of the Republic of Indonesia Number 40 Year 2014 regarding The Amandment of Regulation of Minister of Trade Number 3 Year 2012 Regarding Import Provisions of Ozone Depleting Substances
Laws and regulations Overview
This regulation is the amendment of Regulation of Minister of Trade Number 3 Year 2012 Regarding Import Provisions of Ozone Depleting Substances.
Regulation of Minister of Trade of the Republic of Indonesia Number 3 Year 2012 regarding Import Provisions of Ozone Depleting Substances
Laws and regulations Overview
This regulation regulate the type of Ozone Depleting Substances are prohibited imports and type of Ozone Depleting Substances regulated import trade system.
Category
- Ozone Depleting Substances banned imports
- Ozone Depleting Substances regulated import trade system
Regulation of Minister of Industry of Republic of Indonesia Number 33 Year 2007 regarding Prohibiton Produce ozone depleting substances as well as producing goods that use of ozone depleting substances
Laws and regulations Overview
This regulation regulate Ozone Depleting Substances are prohibited manufactured and used in a particular industry.
Category
- Ozone Depleting Substances prohibited manufactured and used in a particular industry
Government Regulation of the Republic of Indonesia Number 647 Year 2004 regarding Precursors
Japan
Act on the Evaluation of Chemical Substances and Regulation of Their Manufacture, etc. (Chemical Substances Control Law ; CSCL)
CSCL: Class I Specified Chemical Substances
Updated:2024-11-12 (Public Notice 2024-07-10 : Enforced 2024-09-10)
Substances that are persistent, highly bioaccumulative and pose a risk of long-term toxicity to humans or predator animals at a higher trophic level, and that are specified in Article 1 of the Cabinet Order for Enforcement of the CSCL. If a substance corresponds to the "Class I Specified Chemical Substance", the following items are displayed.
Cabinet Order number
It is the number given to the substance when designated by the Cabinet Order as a Class I Specified Chemical Substance.
Date of Designation in the Official Gazette
It is the date when the substance was publicized in the Official Gazette.
Date of Enforcement by the Cabinet Order
It is the date when the substance was designated by the Cabinet Order as a Class I Specified Chemical Substance.
Chemical Substances Name
It is the name of the Class I Specified Chemical Substance designated by the Cabinet Order.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
CSCL: Class II Specified Chemical Substances
Updated: 2017-03-21 (Public Notice 1990-09-12)
Substances that may pose a risk of long-term toxicity to humans or to flora and fauna in the human living environment, and that have been, or in the near future are reasonably likely to be, found in considerable amounts over a substantially extensive area of the environment. These substances are specified in Article 2 of the Cabinet Order for Enforcement of the CSCL.. If a substance corresponds to the "Class II Specified Chemical Substance", the following items are displayed.
Cabinet Order number
It is the number given to the substance when designated by the Cabinet Order as a Class II Specified Chemical Substance.
Date of Enforcement by the Cabinet Order
It is the date when the substance was designated by the Cabinet Order as a Class II Specified Chemical Substance.
Chemical Substances Name
It is the name of the Class II Specified Chemical Substance designated by the Cabinet Order.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
CSCL: Monitoring Chemical Substances
Updated: 2023-07-31 (Public Notice 2018-04-02)
Substances that are persistent and highly bioaccumulative and whose long-term toxicity to humans or predator animals at higher trophic level is unclear. These substances are specified in accordance with paragraph (4) of Article 2 of the CSCL. If a substance corresponds to the "Monitoring Chemical Substance", the following items are displayed.
Registration Number
It is the serial number given to the substance when publicized in the Official Gazette as a Monitoring Chemical Substance.
Date of Designation in the Official Gazette
It is the date when the substance was publicized in the Official Gazette.
MITI Number
It is the number given to the substance in the Official Gazette. The initial number of MITI Numbers (*-****) shows the categories.
Chemical Substances Name
It is the name of the Monitoring Chemical Substance publicized in the Official Gazette.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
CSCL: Priority Assessment Chemical Substances
Updated:2024-09-10 (Public Notice 2024-04-01)
The substances whose long-term toxicity to humans or to flora and fauna in the human living environment is unclear, that have been found, or are expected to be found, in considerable amounts over a substantially extensive area of the environment. For the above reason, these substances are designated in accordance with paragraph (5) of Article 2 of the CSCL as chemicals that require a priority assessment to assess the risk they may pose. If a substance corresponds to the "Priority Assessment Chemical Substance", the following items are displayed.
Registration Number
It is the serial number given to the substance when publicized in the Official Gazette as a Priority Assessment Chemical Substance.
Date of Designation
It is the date of designation as a Priority Assessment Chemical Substance.
MITI Number
It is the number given to the substances including Existing Chemical Substances, Newly Announced Chemical Substances, and others publicized in the Official Gazette. The initial number of MITI Numbers (*-****) shows the categories.
Chemical Substances Name
It is the name of the "Priority Assessment Chemical Substance" publicized in the Official Gazette.
Reason for Inclusion
Perspective for designating as a Priority Assessment Chemical Substance are displayed. Relevant perspectives of "human health effects" and/or "ecological effects" will be displayed.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
CSCL: Canceled Priority Assessment Chemical Substances
Updated:2024-05-07 (Public Notice 2024-03-29)
Substances designated as priority assessment chemical substances whose designation as priority assessment chemical substances has been cancelled based on the results of risk assessment. If a substance corresponds to the "Canceled - Priority Assessment Chemical Substances", the following items are displayed.
Registration Number
It is the serial number given to the substance when publicized in the Official Gazette as a Priority Assessment Chemical Substance.
Date of Cancellation
It is the date when the designation as a Priority Assessment Chemical Substance was cancelled.
MITI Number
It is the number given to the substances including Existing Chemical Substances, Newly Announced Chemical Substances, and others publicized in the Official Gazette. The initial number of MITI Numbers (*-****) shows the categories.
Date of designation as Priority Assessment Chemical Substance
It is the date when the substance was publicized as a Priority Assessment Chemical Substance in the Official Gazette.
Chemical Substances Name
It is the name of the "Priority Assessment Chemical Substance" publicized in the Official Gazette.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Remarks of Cancellation
If the substance is currently included in another designated priority assessment chemical substance, its registration number and chemical substance name will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
CSCL: Specified General Chemical Substances
Updated： 2024-11-12 (Public Notice2024-07-31)
Specified General Chemical Substances are general chemical substances that have been confirmed to be highly toxic to human health and the inhabitation and growth of flora and fauna in the living environment. These substances are publicized in accordance with paragraph (6) of Article 4 or Article 11-2 of the CSCL. If a given new chemical substance is determined as a “specified new chemical substance” after pre-marketing evaluation, it later becomes a “specified general chemical substance” when the name of a new chemical substance is publicized.
If a substance corresponds to the "Specified General Chemical Substances", the following items are displayed.
Registration Number
It is the serial number given to the substance when publicized in the Official Gazette as Newly Announced Chemical Substances (notified on and after April 1, 2011).
Date of Designation in the Official Gazette
It is the date when the substance was publicized in the Official Gazette.
MITI Number
It is the number given to the substances including Existing Chemical Substances, Newly Announced Chemical Substances, and others publicized in the Official Gazette. The initial number of MITI Numbers (*-****) shows the categories.
Category
MITI Numbers are classified into nine categories. One of the sections from Section 1 to Section 9 will be displayed.
Section 1
 Inorganic Compounds
Section 2
 Low Molecular Chain-Like Organic Compounds
Section 3
 Low Molecular Carbo-Monocyclic Organic Compounds
Section 4
 Low Molecular Carbo-polycyclic Organic Compounds
Section 5
 Low Molecular Heterocyclic Organic Compounds
Section 6
 Organic High Polymers Obtained by Addition Polymerization
Section 7
 Organic High Polymers Obtained by Polycondensation
Section 8
 Chemically Modified Starches, Oils and Fats, etc.
Section 9
 Compounds of unknown structure, etc.
Chemical Substances Name
It is the name of the "Specified General Chemical Substances" publicized in the Official Gazette.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Details
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
CSCL: Newly Announced Chemical Substances (notified on and after April 1, 2011)
Updated: 2024-11-12 (Public Notice2024-07-31)
Substances that were notified on and after April 1, 2011, as substances that are either newly manufactured in, or imported to, Japan and are not classified as Class I Specified Chemical Substances. Such substances are designated on and after 2017 as Newly Announced Chemical Substances (notified on and after April 1, 2011) in accordance with paragraph (5) of Article 4.
These substances are designated as General Chemical Substances in accordance with paragraph (7) of Article 2 (excluding Priority Assessment Chemical Substances, Monitoring Chemical Substances and Class I/II Specified Chemical Substances). If a substance corresponds to the "Newly Announced Chemical Substances (notified on and after April 1, 2011)", the following items are displayed.
Registration Number
It is the serial number given to the substance when publicized in the Official Gazette as a Newly Announced Chemical Substances.
Date of Designation in the Official Gazette
It is the date when the substance was publicized in the Official Gazette.
MITI Number
It is the number given to the substances including Existing Chemical Substances, Newly Announced Chemical Substances, and others publicized in the Official Gazette. The initial number of MITI Numbers (*-****) shows the categories.
Category
MITI Numbers are classified into nine categories. One of the sections from Section 1 to Section 9 will be displayed.
Section 1
Inorganic Compounds
Section 2
 Low Molecular Chain-Like Organic Compounds
Section 3
 Low Molecular Carbo-Monocyclic Organic Compounds
Section 4
 Low Molecular Carbo-polycyclic Organic Compounds
Section 5
 Low Molecular Heterocyclic Organic Compounds
Section 6
 Organic High Polymers Obtained by Addition Polymerization
Section 7
 Organic High Polymers Obtained by Polycondensation
Section 8
 Chemically Modified Starches, Oils and Fats, etc.
Section 9
 Compounds of unknown structure, etc.
Chemical Substances Name
It is the name of the "Newly Announced Chemical Substance" publicized in the Official Gazette.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
CSCL: Newly Announced Chemical Substances (notified by March 31, 2011)
Updated:2024-11-12 (Public Notice 2016-07-29)　　
Substances that were notified by March 31, 2011, as substances that are either newly manufactured in, or imported to, Japan and are not classified as Class I Specified Chemical Substances, Type II Monitoring Chemical Substances or Type III Monitoring Chemical Substances. Such substances are designated by 2016 as Newly Announced Chemical Substances (notified by March 31, 2011)in accordance with paragraph (5) of Article 4.
These substances are designated as General Chemical Substances in accordance with paragraph (7) of Article 2 (excluding Priority Assessment Chemical Substances, Monitoring Chemical Substances and Class I/II Specified Chemical Substances). If a substance corresponds to the "Newly Announced Chemical Substances (notified by March 31, 2011)", the following items are displayed.
Registration Number
It is the serial number given to the substance when publicized in the Official Gazette as a Newly Announced Chemical Substances.
Date of Designation in the Official Gazette
It is the date when the substance was publicized in the Official Gazette.
MITI Number
It is the number given to the substances including Existing Chemical Substances, Newly Announced Chemical Substances, and others publicized in the Official Gazette. The initial number of MITI Numbers (*-****) shows the categories.
Category
MITI Numbers are classified into nine categories. One of the sections from Section 1 to Section 9 will be displayed.
Section 1
Inorganic Compounds
Section 2
 Low Molecular Chain-Like Organic Compounds
Section 3
 Low Molecular Carbo-Monocyclic Organic Compounds
Section 4
 Low Molecular Carbo-polycyclic Organic Compounds
Section 5
 Low Molecular Heterocyclic Organic Compounds
Section 6
 Organic High Polymers Obtained by Addition Polymerization
Section 7
 Organic High Polymers Obtained by Polycondensation
Section 8
 Chemically Modified Starches, Oils and Fats, etc.
Section 9
 Compounds of unknown structure, etc.
Chemical Substances Name
It is the name of the "Newly Announced Chemical Substance" publicized in the Official Gazette.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
Remarks to Existing Chemical Substances of Industrial Safety and Health Act
On the basis of the public notice of February 5, 1979, chemicals that have been published pursuant to the provisions of the CSCL by June 29, 1979, and the chemicals listed in Japanese Pharmacopoeia eighth amendment (1971), are also treated as existing chemical substances for ISHA. For those substances, "Chemicals have been notified in accordance with the provisions of Chemical Substances Control Law on by June 29, 1979" will be displayed.
Details to Existing Chemical Substances of Industrial Safety and Health Act
If there is more information relating to Industrial Safety and Health Act, link to the website of Ministry of Health, Labour and Welfare will be displayed.
CSCL: Existing Chemical substances
Updated: 2024-11-12 (Public Notice 1974-05-14)
Substances that were manufactured or imported for business purpose at the time of the promulgation of the CSCL (excluding substances that were manufactured or imported for testing and research purposes and those that were manufactured or imported for use as reagents), and whose names were published pursuant to the CSCL (chemical substances were listed in the list of Existing Chemical Substances).
Under the current CSCL, substances are designated as General Chemical Substances in accordance with paragraph (7) of Article 2 (excluding Priority Assessment Chemical Substances, Monitoring Chemical Substances and Class I/II Specified Chemical Substances). If a substance corresponds to the "Existing Chemical substances", the following items are displayed.
MITI Number
It is the number given to the substances including Existing Chemical Substances, Newly Announced Chemical Substances, and others publicized in the Official Gazette. The initial number of MITI Numbers (*-****) shows the categories.
Category
MITI Numbers are classified into nine categories. One of the sections from Section 1 to Section 9 will be displayed.
Section 1
Inorganic Compounds
Section 2
 Low Molecular Chain-Like Organic Compounds
Section 3
 Low Molecular Carbo-Monocyclic Organic Compounds
Section 4
 Low Molecular Carbo-polycyclic Organic Compounds
Section 5
 Low Molecular Heterocyclic Organic Compounds
Section 6
 Organic High Polymers Obtained by Addition Polymerization Definition of the terms of Section 6 [PDF]
Section 7
 Organic High Polymers Obtained by Polycondensation Definition of the terms of Section 7 [PDF]
Section 8
 Chemically Modified Starches, Oils and Fats, etc.
Section 9
 Pharmaceutical compounds, etc.
Chemical Substances Name
It is the substance name listed in the List of Existing Chemical Substances (the Official Gazette).
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
Remarks to Existing Chemical Substances of Industrial Safety and Health Act
On the basis of the public notice of February 5, 1979, chemicals that have been published pursuant to the provisions of the CSCL by June 29, 1979, and the chemicals listed in Japanese Pharmacopoeia eighth amendment (1971), are also treated as existing chemical substances for ISHA. For those substances, "Chemicals have been notified in accordance with the provisions of Chemical Substances Control Law on by June 29, 1979" will be displayed.
Details to Existing Chemical Substances of Industrial Safety and Health Act
If there is more information relating to Industrial Safety and Health Act, link to the website of Ministry of Health, Labour and Welfare will be displayed.
CSCL: Type II Monitoring Chemical Substances (before amendment)
Updated:2024-11-12(Public Notice 2011-03-22)
Substances that are suspected to have a long-term toxicity to humans, and that were published before April 1, 2011, as being Designated Chemical Substances or Type II Monitoring Chemical Substances. Designated Chemical Substances that were published by March 2, 2005, are displayed as Type II Monitoring Chemical Substances (before amendment), in order for them to be considered Type II Monitoring Chemical Substances in NITE-CHRIP.
Under the current CSCL, these substances are designated as General Chemical Substances in accordance with paragraph (7) of Article 2 (excluding Priority Assessment Chemical Substances, Monitoring Chemical Substances and Class I/II Specified Chemical Substances). If a substance corresponds to the "Type II Monitoring Chemical Substances (before amendment) ", the following items are displayed.
Registration Number
It is the serial number given to the substance when publicized in the Official Gazette as a Type II Monitoring Chemical Substance.
Date of Designation in the Official Gazette
It is the date when the substance was publicized in the Official Gazette.
MITI Number
If there is a MITI number for the substance, the number will be displayed.
Chemical Substances Name
It is the name of the Type II Monitoring Chemical Substance publicized in the Official Gazette.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
CSCL: Type III Monitoring Chemical Substances (before amendment)
Updated:2024-11-12（Public Notice 2011-03-22）
Type III Monitoring Chemical Substances (before amendment) are substances that may interfere with the survival and/or growth of flora and fauna, and that were published before April 1, 2011, as Type III Monitoring Chemical Substances.
Under the current CSCL, these substances are designated as General Chemical Substances in accordance with the provisions of paragraph (7) of Article 2 (excluding Priority Assessment Chemical Substances, Monitoring Chemical Substances and Class I/II Specified Chemical Substances). If a substance corresponds to the "Type III Monitoring Chemical Substances (before amendment) ", the following items are displayed.
Registration Number
It is the serial number given to the substance when publicized in the Official Gazette as a Type III Monitoring Chemical Substance.
Date of Designation in the Official Gazette
It is the date when the substance was publicized in the Official Gazette.
MITI Number
If there is a MITI number for the substance, the number will be displayed.
Chemical Substances Name
It is the name of the Type III Monitoring Chemical Substance publicized in the Official Gazette.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed
CSCL: Chemical Substances exempted from notification of manufacturing/import amount
Updated: 2024-11-12 (Public Notice 2024-03-29)
It is the substance that were publicized in the Official Gazette as a chemical substance for which it is not found necessary to conduct an assessment as prescribed in paragraph (5) of Article 2 of the CSCL. If a substance corresponds to the "Chemical Substances exempted from notification of manufacturing/import amount ", the following items are displayed.
Category
Category of the substance that were publicized in the Official Gazette as a "Chemical Substances exempted from notification of manufacturing/import amount" One of the sections from Section 1 to Section 9 will be displayed.
Section 1
Inorganic Compounds
Section 2
 Low Molecular Chain-Like Organic Compounds
Section 3
 Low Molecular Carbo-Monocyclic Organic Compounds
Section 4
 Low Molecular Carbo-polycyclic Organic Compounds
Section 5
 Low Molecular Heterocyclic Organic Compounds
Section 6
 Organic High Polymers Obtained by Addition Polymerization
Section 7
 Organic High Polymers Obtained by Polycondensation
Section 8
 Chemically Modified Starches, Oils and Fats, etc.
Section 9
 Pharmaceutical compounds, etc.
MITI Number
MITI number of the substance will be displayed.
Date of Designation in the Official Gazette
It is the date of "current substance list" was publicized as "Chemical Substances exempted from notification of manufacturing/import amount" in the Official Gazette.
Chemical Substances Name
It is the name of the substance corresponding to the MITI Number.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
CSCL: Chemical Substances not regarded as a New Chemical Substances
Updated:2024-11-12
It refers to substances, that are considered as "not regarded as a new chemical substance" based on the notice, "Implementation of the Act on the Evaluation of Chemical Substances and Regulation of Their Manufacture, etc." published in joint names by the Director General, Pharmaceutical and Food Safety Bureau, Ministry of Health, Labour and Welfare, the Director General, Manufacturing Industries Bureau, Ministry of Economy, Trade and Industry and the Director General, Environmental Policy Bureau, Ministry of the Environment on March 31, 2011.
In case the related chemical substances are Monitoring Chemical Substances or Priority Assessment Chemical Substances, please refer to "3 Manufacture, etc. of Class I Specified Chemical Substances, Class II Specified Chemical Substances, Monitoring Chemical Substances, Priority Assessment Chemical Substances, and General Chemical Substances" of the above-mentioned notice.
If a substance corresponds to the "Chemical Substances not regarded as a New Chemical Substances", the following items are displayed.
Classification
The term "Not Regarded as a New Chemical Substance" will be displayed.
Related Class Reference Number in The Gazette List
MITI-Number of the referenced materials will be displayed.
Remarks
If the scope of the CAS Registry Number (CAS RN) includes non-relevant materials, the conditions applicable to the CAS Registry Number (CAS RN) will be displayed.
Detail
If there is more information, link to the CSCL database (J-CHECK) will be displayed.
Japan CSCL: Chemical Substances not subject to notification requirements
Updated: 2024-11-12
According to Article 2, Paragraph 1 of the CSCL, which defines “ The term 'chemical substance' means a chemical compound obtained by causing chemical reactions to elements or compounds”, an “element” does not correspond to a chemical substance under the CSCL. The term “element” refers to a substance in any state (e.g., excited state, radical) that consists of only one type of atom. Distinction between isotopes is not required. Alloys are interpreted as mixtures of “elements” and, therefore, are treated as outside the scope of “chemical substance”' under the CSCL. For details, please refer to CSCL's Q&A (METI: in Japanese).
NITE-CHRIP provide information about elements within a chemical substance not subject to notification under the CSCL.
Name
The substance name is displayed.
Act on Confirmation, etc. of Release Amounts of Specific Chemical Substances in the Environment and Promotion of Improvements to the Management Thereof (PRTR-SDS Law)
The Act on Confirmation, etc. of Release Amounts of Specific Chemical Substances in the Environment and Promotion of Improvements to the Management Thereof, was enacted in 1999 to promote the voluntary improvements of the management of chemical substances by business operators and prevent impediments to the preservation of the environment.

Class I Designated Chemical Substances are chemical substances that may harm human health, interfere with the survival and/or growth of flora and fauna, or deplete the ozone layer, and that are considered to be persistent over a substantially extensive area of the environment in terms of their physical/chemical properties and the amounts manufactured, imported, and used. These substances are designated in accordance with Article 1 of the Cabinet Order for Enforcement of the Act on Confirmation, etc. of Release Amounts of Specific Chemical Substances in the Environment and Promotion of Improvements to the Management Thereof, based on paragraph (2) of Article 2 of the same Act.

Class II Designated Chemical Substances are chemical substances that may have the same requirements as Class I Designated Chemical Substances as a result of increases in the amounts manufactured, imported, or used. These substances are designated in accordance with Article 2 of the Cabinet Order for Enforcement of the Act on Confirmation, etc. of Release Amounts of Specific Chemical Substances in the Environment and Promotion of Improvements to the Management Thereof, based on paragraph (3) of Article 2 of the same Act.

The designation for Class I and Class II Designated Chemical Substances were revised by Cabinet Order on November 21, 2008 and October 20, 2021.
* Former Designated Chemical Substances: 354 Class I substances; 81 Class II substances (Published : March 29, 2000)
* Currently Designated Chemical Substances: 462 Class I substances ; 100 Class II substances (Revised : November 21, 2008)
* New Designated Chemical Substances: 515 Class I substances ; 134 Class II substances (Revised : October 20, 2021)

When the regulated substance of notification is metal etc., you need to convert into elements. Please refer to examples of metal compounds (until March 2023) and examples of metal compounds (from April 2023).
PRTR-SDS Law (until March 2023)
Updated: 2024-11-12 (Promulgated 2008-11-21)
Classification
Either of the followings is displayed.
I
 It refers to Class I Designated Chemical Substances. Anyone handling Class I Designated Chemical Substances in business is required to notify the quantities of these substances released to the environment (PRTR), etc. and to provide the information on properties and handling of these substances (Safety Data Sheet; SDS) when transferring or providing these substances (and/or products containing these substances) to the third parties.
II
 It refers to Class II Designated Chemical Substances. Anyone handling Class II Designated Chemical Substances in business is required to provide the Safety Data Sheet (SDS) when transferring or providing these substances (and/or products containing these substances) to the third parties.
Specified Class I
 It refers to Specified Class I Designated Chemical Substances. These are the substances designated as those with carcinogenicity to human among Class I Designated Chemical Substances. Notifying the released quantities of these substances is required more strictly than that of Class I Designated Chemical Substances.
Cabinet Order No.
It is the number assigned to each substance designated by the Cabinet Order.
Cabinet Order Name
It is the name of substance designated by the Cabinet Order.
Basis of selection
You can see the hazard data which is the bases of selection. (in Japanese)
PRTR-SDS Law (from April 2023)
Updated:2024-11-12 (Promulgated 2021-10-20)
Japan PRTR-SDS Number（JPSN)
JPSN is a unique number given to each substance in this Act. Notifications such as emissions for after 2023 fiscal year will be made using this number.
Classification
Either of the followings is displayed.
I
 It refers to Class I Designated Chemical Substances. Anyone handling Class I Designated Chemical Substances in business is required to notify the quantities of these substances released to the environment (PRTR), etc. and to provide the information on properties and handling of these substances (Safety Data Sheet; SDS) when transferring or providing these substances (and/or products containing these substances) to the third parties.
II
 It refers to Class II Designated Chemical Substances. Anyone handling Class II Designated Chemical Substances in business is required to provide the Safety Data Sheet (SDS) when transferring or providing these substances (and/or products containing these substances) to the third parties.
Specified Class I
 It refers to Specified Class I Designated Chemical Substances. These are the substances designated as those with carcinogenicity to human among Class I Designated Chemical Substances. Notifying the released quantities of these substances is required more strictly than that of Class I Designated Chemical Substances.
Cabinet Order No.
It is the number assigned to each substance designated by the Cabinet Order.
Cabinet Order Name
It is the name of substance designated by the Cabinet Order.
Basis of selection
You can see the hazard data which is the bases of selection. (in Japanese)
Industrial Safety and Health Act (ISHA)
ISHA: Existing Chemical Substances / Newly Announced Chemical Substances
Updated: 2024-11-12 (Public Notice 2024-06-27, 2024-09-27)
Existing Chemical Substances of Industrial Safety and Health Act are listed separately in the following two types.

(1) ISHA: Existing Chemical Substances: Pursuant to the provisions of the Industrial Safety and Health Act Enforcement Order Supplementary Provisions of Article 9.2, it is the chemical substance which Minister of Labour has published its name and ISHA number, etc. with the Official Gazette as the chemical substance which had been 'manufactured or imported' in the country before June 29, 1979.

(2) ISHA: Newly Announced Chemical Substances: Pursuant to the provisions of the Industrial Safety and Health Act Article 57.3.3, it is the chemical substance which the Minister of Health, Labour and Welfare has published its name and ISHA number, etc. with the Official Gazette as a new chemical substance. (Since June 30, 1979 new chemical substances of the Act have been registered and published in the Official Gazette as the Newly Published Chemical Substances).
Note: On the basis of the public notice of February 5, 1979, chemicals that have been published pursuant to the provisions of the CSCL until June 29, 1979, and the chemicals listed in Japanese Pharmacopoeia eighth amendment (1971), are also treated as existing chemical substances for ISHA. This information is mentioned in the " Remarks to Existing Chemical Substances of Industrial Safety and Health Act " in the section of the CSCL.
ISHA: Chemical Substances Prohibited to Manufacturing, etc.
Updated: 2018-06-05 (Public Notice 2018-04-06)
Article 55 of the Law states that substances specified in paragraph (1) of Article 16 of the Cabinet Order, which are deemed to be substances that inflict serious damage on the health of workers, shall not be manufactured, imported, transferred, provided or used.
Cabinet Order Number
It is the number assigned to each substance designated by Article 16 of the Cabinet Order.
Cabinet Order Name
It is the name of the substances designated by Article 16 of the Cabinet Order.
Range of Application (weight %)
The range of content (% by weight) of regulated substances in preparations, etc. that are subject to the regulation.
ISHA: Chemical Substances Requiring Permission for Manufacture, etc.
Updated: 2018-06-05 (Public Notice 2018-04-06)
Paragraph (1) of Article 56 of this Act states that a person who intends to manufacture any of the substances specified in item 1 of Attached Table 3 in Article 17 of the Cabinet Order, which are deemed to have the possibility of inflicting serious damage on the health of workers, shall obtain advance permission from the Minister of Health, Labour and Welfare.
Cabinet Order Number
It is the number assigned to each substance designated by Article 17, attached table 3, item 1 of the Cabinet Order.
Cabinet Order Name
It is the name of the substances designated by Article 17, attached table 3, item 1 of the Cabinet Order.
Range of Application (weight %)
The range of content (% by weight) of regulated substances in preparations, etc. that are subject to the regulation.
ISHA: Chemical Substances Requiring Labeling and Delivery of Documents, etc.
Updated: 2024-11-12 (Public Notice 2023-08-30)
Paragraph (1) of Article 57 of the Act states that any of the chemical substances specified in Article 18 or item 1 of Attached Table 3 in Article 17 of the Cabinet Order, which are deemed to have the possibility of inflicting serious damage on the health of workers at the time of their transfer or provision, shall be indicated in the name of the substance, the ingredients or other such details provided on the container or package.

Paragraph (1) of Article 57-2 of the Act states that businesses are required to provide documents (SDSs) to their clients when transferring or providing any of the chemical substances specified in item 1 of Attached Table 3 in Article 17 or Attached Table 9 in Article 18-2 of the Cabinet Order, which are deemed to have the possibility of inflicting serious damage on the health of workers at the time of their transfer or provision.

By revision of the Cabinet Order for the ISHA that came into effect on June 1, 2016, the substances to be labelled and the substances to be notified became same except for non-powder metals. In NITE-CHRIP they are listed as "Chemical Substances Requiring Labeling and Delivery of Documents, etc.".

The substances to labeling and the substances to notification that were added in the Order for Enforcement of the Revised Industrial Safety and Health Act that came into effect in 2025 and 2026 (April 1) are listed with their enforcement dates.
Cabinet Order Number
It is the number assigned to each substance designated by Article 17, attached table 3, item1 or Article1 8 and 18-2, attached table 9 of the Cabinet Order, Article 30 and 34-2, attached table 2 of the Ordinance.
Cabinet Order Name
It is the name of the substances designated by Article 17, attached table 3, item 1 or Article 18 and 18-2, attached table 9 of the Cabinet Order, Article 30 and 34-2, attached table 2 of the Ordinance.
Range of Application (weight %)
The range of content (% by weight) of regulated substances in preparations, etc. that are subject to the regulation.
ISHA: Carcinogenic Substances (Ordinance on Industrial Safety and Health) (subject to 30-year storage of work records, etc.)
Updated: 2024-11-12 ( 2023-03-01 revised / MHLW-HP)
Carcinogenic substances (Ordinance on Industrial Safety and Health) are those defined by the Minister of Health, Labor and Welfare as carcinogenic substances based on the provisions of Article 577-2-3 of the Ordinance on Industrial Safety and Health.
Employers are obliged to keep work records, etc. of workers engaged in manufacturing or handling these substances for 30 years.
Substances that contain target substances at or above the cut-off value for the SDSs specified in Appended Table 2 of the Industrial Safety and Health Ordinance are subject to the regulation. However, ethanol and 'Substances under special supervision' stipulated in Article 38-3 of the Ordinance on Prevention of Hazards from Specified Chemical Substances are excluded.
In addition, if a business operator handles the substance temporarily, it will be exempted from the 30-year storage of work records, etc.
Substance Name in GHS classification
It is the name of the substance in "GHS Classification Results by the Japanese Government".
Implementation
It is the date on which this regulation applies.
Carcinogenicity in GHS classification
Category of carcinogenicity in "GHS Classification Results by the Japanese Government" is displayed.
Range of Application (weight %)
The range of content (% by weight) of regulated substances in preparations, etc. that are subject to the regulation.
Remarks
Supplementary information about the target substance is displayed.
Details
Link to the NITE Japan-GHS for each substance.
ISHA: Concentration standards for the prevention of health problems caused by chemical substances (Concentration standard value setting substance)
Updated:2024-07-31 (Public Notice 2024-05-08)
The standards for substances and concentrations specified by the Minister of Health, Labour and Welfare pursuant to the provisions of Article 577-2, Paragraph 2 of the Industrial Safety and Health Regulations are listed.
The employer shall, in the indoor workshop where the substances specified by the Minister of Health, Labour and Welfare are manufactured or handled, limit the degree of exposure of workers to these substances to the concentration standard (concentration standard value) specified by the Minister of Health, Labour and Welfare.
If the short-time concentration standard values are specified as the ceiling values, this values are the reference value that should not be exceeded for any short exposure.
Number
These numbers are assigned by NITE to match the order of the list on the MHLW website.
Kinds of substances（Substance name）
Kinds of substances (Substance name) specified by public notice
Remarks
Precautions associated with the Substance name
Eight-hour concentration standard value
The weighted average value based on the measurement time of each measurement of substance concentration during 8 hours of exposure per day shall be less or equal to this value than this. (Concentration in air at a temperature of 25 degrees and 1 atm)･(Unit: ppm or mg/m2)
Short-time concentration standard value
For the 15 minute exposure concentration during which the concentration of the substance is expected to be the highest during the working day, the weighted average value of each measurement by measurement time shall be less than or equal to this. (Concentration in air at a temperature of 25 degrees and 1 atm)･(Unit: ppm or mg/m2)
Sampling Method
Standard sampling methods in technical guidelines
Analytical Method
Standard analytical methods in technical guidelines
ISHA: Chemical substances that cause skin disorders, etc. and other chemical substances that must be handled with impermeable protective equipment etc. based on special chemical regulations.
Updated：2024-1-30（2023.11.09 revised / MHLW Homepage）
Substances that must be handled with impervious protective equipment are chemical substances that cause skin disorders, etc. as defined in Article 594-2 of the Ordinance on Industrial Safety and Health (effective April 1, 2020) and other substances for which protective equipment etc is required by special chemical regulations. Chemical substances that cause skin disorders etc. include skin-irritating hazardous substances (chemical substances classified as category 1 in terms of "skin corrosion/irritation", "serious eye damage/eye irritation", or "respiratory or skin sensitization" in the hazard information listed in the GHS classification results published by the government) and skin-absorbable hazardous substances (chemical substances that are clearly known to cause health problems by being absorbed through or penetrating the skin).
The following items will be displayed if these impermeable protective equipment are required to be used.
Number
These numbers are assigned by NITE to match the order of the list on the MHLW website.
Substance Name
It is the name of the substance in "GHS Classification Results by the Japanese Government" or the name designated by the appricable regulation.
Classification of Target Substances (one of the following is displayed)
Skin irritating hazardous substance
 Chemical substances that are classified as Category 1 in either "skin corrosiveness/irritation," "serious eye damage/eye irritation," or "respiratory or skin sensitization" according to the results of "GHS Classification Results by the Japanese Government". However, substances for which the use of impermeable protective equipment, etc. is obligatory by "special chemical regulations etc." are excluded.
Skin-absorbable hazardous substances
 Chemical substances that are known to cause health problems if absorbed through the skin or if they penetrate the skin. However, substances for which the use of impermeable protective equipment, etc. is obligatory by "special chemical regulations etc." are excluded.
Special chemical regulations etc.
 "Special chemical regulations etc." include "Ordinance on Prevention of Hazards Due to Specified Chemical Substances", " Ordinance on Prevention of Organic Solvent Poisoning", "Ordinance on Prevention of Lead Poisoning" and "Ordinance on Prevention of Tetraalkyl Lead Poisoning".
Cutoff value (weight percent)
Preparations of which content of chemical substances that cause skin disorders is less than the cut-off value do not fall under the category of chemical substances that cause skin disorders. Regarding chemical substances to which special chemical regulations apply, the special regulations do not apply to preparations with a content below the cut-off value.
Remarks
Supplemental information about the substance is displayed. If the substance is subject to"special chemical regulations etc., the name of the appricable regulation is displayed.
Implementation
It is the date on which this regulation applies.
Details
Link to the NITE Japan-GHS for each substance.
ISHA: Dangerous Substances
Updated: 2014-09-11
Article 6 of the "Enforcement Order of Industrial Safety and Health Act" (hereinafter referred to as the "Cabinet Order") defines "the work subject to the appointment of an Operation Chief" in order to prevent industrial accidents, pursuant to the provision of Article 14 of the Industrial Safety and Health Act. Regulated, dangerous, or toxic substances are listed in the appended tables of the Cabinet Order.
The substances that are listed in Appended Table 1 of the Cabinet Order are called Dangerous Substances. When a substance corresponds to a Dangerous Substance, one of the following classifications, "explosive substances", "combustible substances", "oxidizing substances", "inflammable substances", or "flammable gases" is displayed in the column "Category", and the Cabinet Order number and Cabinet Order name will be displayed in the respective columns.
ISHA: Specified Chemical Substances
Updated: 2024-06-04 (Public Notice 2020-04-22)
The substances that are listed in Appended Table 3 of the Cabinet Order are called Specified Chemical Substances. The following items are displayed.
Classification
Either of the followings is displayed.
Group-1 substance
 Substances that cause chronic or delayed damage, such as cancer, that are particularly harmful.
Group-2 substance
 Substances that cause chronic/delayeSubstances that cause chronic/delayed disorders such as cancer and are not classified as Class 1 substances.
Group-3 substance
 Substances that cause acute poisoning due to large volume leakage.
Cabinet Order number
It is the number assigned to each substance designated.
Cabinet Order name
It is the name of the substances designated.
Range of Application (weight %)
The range of content (% by weight) of regulated substances in preparations, etc. that are subject to the regulation.
Note
It is indicated if the substance is one of the following.
Substances under special supervision
 Among Group-1 and Group-2 substances, those that are carcinogenic or suspected to be carcinogenic (posting of names, precautions, etc. (Article 38-3 of the Law Concerning Special Measures) and storage of measurement results of airborne concentration and records of workers' work and medical examinations for 30 years (Articles 38-4 and 40 of the Law Concerning Special Measures) are required, etc.).
Specified Group-2 substances
 Substances that require special attention to leakage among Group-2 substances.
Special organic solvent, etc.
 Group-2 substances that are related to Ordinance on Prevention of Organic Solvent Poisoning.
Auramine, etc.
 Substances that may cause tumors such as cancer in the organs of the urinary tract among Group-2 Substances.
Group-2 substances under supervision
 Substances other than Specified Group-2 Substances, Special organic solvents, etc., and Auramine, etc., among Group-2 Substances.
ISHA: Lead etc. / Tetraalkyl lead etc.
Updated: 2024-06-04
"Lead, etc." are defined, in Appended Table 4 of the Cabinet Order, as substances that are subject to regulated lead operations. When a substance corresponds to "Lead, etc.", "Ordinance on Prevention of Lead Poisoning" is displayed in the column "Relevant Ordinance etc.", and "Lead, etc." is displayed in the column "Cabinet Order Name". In the column "Remarks", "lead, lead alloys, lead compounds and mixtures of these substances with others" is displayed. It should be noted that the lead compounds are specified by the Minister of Health, Labour and Welfare, and have been announced in the Official Gazette.

"Tetraalkyl lead, etc." is defined, in Appended Table 5 of the Cabinet Order, to comprise substances that are subject to regulated tetraalkyl lead operations. When a substance corresponds to tetraalkyl lead compounds, "Ordinance on Prevention of Tetraalkyl Lead Poisoning" is displayed in the column "Relevant Ordinance etc.", and "Tetraalkyl lead, etc." is displayed in the column "Cabinet Order Name". In the column "Remarks", "tetra methyl lead, tetra ethyl lead, monomethyl,triethyl lead, dimethyl,diethyl lead and trimethyl,monoethyl lead, and also anti-knocking agents containing the said substances" is displayed.
ISHA: Organic Solvent Poisoning
Updated: 2024-03-12 (Public notice 2014-08-20)
The substances that are listed in Appended Table 6-2 of the Cabinet Order. When a substance corresponds to organic solvents, one of the following, "First-class organic solvents, etc.", "Second-class organic solvents, etc.", or "Third-class organic solvents, etc." is displayed in the column "Category", and the Cabinet Order number and Cabinet Order name will be displayed in the respective columns.
ISHA: Administrative Control Levels of Working Environment Evaluation Standards
Updated: 2024-11-12 (Public Notice 2020-04-22)
These are the concentrations provided in the attached table of "Working Environment Evaluation Standards" (Notification of the Ministry of Health, Labor, and Welfare).
ISHA: Guidelines for Carcinogenic Substances
Updated: 2020-03-17 (Public Notice 2020-02-07）
These are the substances which are likely to cause cancer or other serious health impairment to workers. The public guidelines for the businesses that manufacture or handle these substances are made to prevent the damage of workers' health caused by the said chemical substances based on paragraph (3) of Article 28 of the Act.
In the production and handling of these substances, businesses are required to take measures, such as reducing workers' exposure, work environment measurement, industrial health education, record keeping and Labeling and Deliver of SDS, etc.
The guidelines are published on the "Workplace Safety Site", the homepage of the MHLW.
Name
It is the substance name published based on paragraph (3) of Article 28 of the Act.
Details
NITE-CHRIP links to the "Workplace Safety Site" and you can see the guidelines.(in Japanese)
ISHA: Strong Mutagenic Chemical Substances
Updated: 2024-11-12 (Announced: 2023-11-30)
These are the substances for which strong mutagenicity was recognized by the hazard investigation conducted based on Article 58 of the ISHA for Existing Chemical Substances in addition to Article 57-4 of the Act for Notified Chemical Substances. The substance names are announced in the Notification based on the Act.
In the production and handling of these substances, businesses are required to take measures, such as reducing workers' exposure, work environment measurement, industrial health education, Labeling and Deliver of SDS, etc. and record keeping, according to "Guidelines for Preventing Health Impairment by Chemical Substances with Mutagenicity Recognized", Labor Standards Bureau Notification No. 312, dated May 17, 1993 (Please see here : in Japanese).
Classification
Existing Chemical Substances or Notified Chemical Substances is shown.
Name
It is the name described in an attached sheet of the notification.
Date of Notification
It is the date published the notification and the number allocated to the substance in the attached sheet.
Poisonous and Deleterious Substances Control Act
Updated:2024-11-12 (Public Notice 2024-05-29)
The Poisonous and Deleterious Substances Control Act was enacted in 1950 to carry out the controls on poisonous and deleterious substances that are needed to ensure health and hygiene.

Poisonous and Deleterious Substances are judged to be poisonous and deleterious based on knowledge regarding animals and people in the Criteria for Poisonous and Deleterious Substances. These substances are specified in paragraph (1) of Article 2 (Poisonous Substances), paragraph (2) of Article 2 (Deleterious Substances) and paragraph (3) of Article 2 (Specified Poisonous Substances) of the Act or in Article 1 (Poisonous Substances), Article 2 (Deleterious Substances) and Article 3(Specified Poisonous Substances) of the Cabinet Order for Designation of the Poisonous and Deleterious Substances Control Act.
Classification Law Cabinet Order
Poisonous Substances Attached Table 1 -
Attached Table 1-28 of the Law; In addition to the substances in the previous items, preparations containing those in the previous items, and other toxic substances which are designated by Cabinet Order. Article 1
Deleterious Substances Attached Table 2 -
Attached Table 2-94 of the Law; In addition to the substances in the previous items, preparations containing those in the previous items, and other deleterious substances whih are designated by Cabinet Order. Article 2
Specified Poisonous Substances Attached Table 3 -
Attached Table 3-10 of the Law; In addition to the poisonous substances in the previous items, prepatations containing those in the previous items, and other substances with significant toxicity which are designated by Cabinet Order. Article 3
Classification
Either of the followings is displayed. Some substances may correspond to plural classifications.
Poisonous Substances These are defined as substances which may cause severe damage to human physiological function. In some case there are specific exceptions according to poisonous substances content and others.
Deleterious Substances These are defined as substances which may cause relatively light damage to human physiological function. In some case there are specific exceptions according to deleterious substances content and others.
Specified Poisonous Substances These are extremely poisonous among poisonous substances and are defined as substances which have high possibility of the harm for the person depending on the direction for uses.
Law or Cabinet Order Number
It is the number given to each substance designated by the Act or the Cabinet Order.
Law or Cabinet Order Name
It is the name of the substance designated by the Act or the Cabinet Order.
Poisonous and Deleterious Substances Control Act: Substances Excluded from Organic Cyanide Compounds
Updated: 2024-07-31 (Public Notice 2024-05-29)
These are the substances that are excluded from "Organic cyanide compounds and preparations containing it" specified in item 32 of paragraph (1) of Article 2 (Deleterious Substances) of the Cabinet Order for designation of the Poisonous and Deleterious Substances Control Act.
Classification
"Deleterious Substances/Exception(Cabinet order)" is displayed.
Cabinet Order Number
It is the number given to each substance designated by the Cabinet Order.
Name
It is the name of the substance designated by the Cabinet Order.
Act on Prohibition of Chemical Weapons and Control, etc. of Specific Chemicals
Updated: 2024-11-12((Public Notice 2020-06-07)
The purpose of the Act, which aims to ensure appropriate implementation of the Convention on the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons and on their Destruction, and the International Convention for the Suppression of Terrorist Bombings, is to prohibit the manufacture, possession, provision, and acceptance of chemical weapons, control the manufacture and use of specific chemicals, and implement other necessary measures.

Specific Chemicals are substances that are likely to be used for the manufacture of chemical weapons, are specified in the Cabinet Order for Enforcement of the Act on the Prohibition of Chemical Weapons and the Control, etc. of Specific Chemicals (hereinafter the "Cabinet Order"), and are specified in the 3rd or 4th column of the 1st section in the Appended Table of paragraph (1) of Article 3 of the Cabinet Order, based on paragraph (3) of Article 2 of the Act. These substances are regulated with regard to the following: permission for their manufacture and use; approval for their import; and restrictions on their possession and their transfer/acceptance; their conveyance; and their destruction.
In Japan, certain salts of Specific Chemicals are also regulated as Specific Chemicals based on the notice of Minister of Economy, Trade and Industry (METI) dated on April 1, 2010. (Only available in Japanese)

Class I Designated Chemicals are Chemicals designated in the Cabinet Order (hereinafter "Designated Chemicals") that are unlikely to be used for anything other than the manufacture of chemical weapons and that are specified in the 3rd or 4th column of the 2nd section in the Appended Table of paragraph (3) of Article 3 of the Cabinet Order, based on paragraph (5) of Article 2 of the Act. Notification of the scheduled and actual manufacturing,etc. quantity, the actual import/export quantity, etc., is required.

Class II Designated Chemicals are Designated Chemicals other than Class I Designated Chemicals that are specified in the 3rd or 4th column of the 3rd section in the Appended Table of paragraph (2) of Article 3 of the Cabinet Order, based on paragraph (5) of Article 2 of the Act. Notification of the scheduled and actual manufacturing quantity, the actual import/export quantity, etc., is required.

NITE-CHRIP provides information about Specific Chemicals, Class I Designated Chemicals and Class II Designated Chemicals designated by the Cabinet Order but no information about "Organic Chemicals" specified in Article 4 of the Cabinet Order based on paragraph (1) of Article 29 of the Act.
Please see the METI's website (only in Japanese) in details: see "Precautions for using Table 2" on the website.
Classification
Either of the following is displayed.
Specific Chemicals (Toxic chemicals or Precursors) Specific Chemicals shall mean toxic chemicals or materials from which toxic chemicals are made (precursors).
Class I Designated Chemicals (Toxic chemicals or Precursors) First-class designated chemicals shall mean toxic chemicals or materials from which toxic chemicals are made (precursors).
Class II Designated Chemicals (Toxic chemicals or Precursors) Second-class designated chemicals shall mean toxic chemicals or materials from which toxic chemicals are made (precursors).
Cabinet Order Number
It is the number given to each substance designated by the Cabinet Order.
Cabinet Order Name
It is the name of the substance designated by the Cabinet Order.
Act on the Protection of the Ozone Layer through the Control and Other Measures on Specified Substances and Other Substances
Updated: 2018-10-10 (Public Notice 2018-08-10)
The Act on the Protection of the Ozone Layer through the Control of Specified Substances and Other Measures was enacted in 1988 to fulfill the obligations and decisions of the contracting parties to the Vienna Convention for the Protection of the Ozone Layer (adopted in 1985) and the Montreal Protocol on Substances that Deplete the Ozone Layer (adopted in 1987). This Act stipulates regulations concerning the manufacture of the Specified Substances, control of their discharge and rationalization of their use, etc.

Based on the "Kigali Revision" of the Montreal Protocol, the Revised Ozone Layer Protection Act specifies measures to be taken to protect the ozone layer while considering the potential impact on climate. These measures include the addition of "alternatives to specified substances" as substances that are subject to manufacturing regulation. The specific types of such alternatives are specified by Orders, according to the Kigali Revision.

Specified Substances are substances that deplete the Ozone Layer and are specified in the Appended Table 1 of paragraph (1) of Article 1 of the Order for Enforcement of the Act.

Alternatives to Specified Substances (ozone-depleting substances) as substances that seriously exacerbate global warming, are specified in the Appended Table 2 of paragraph (1) of Article 1 of the Order for Enforcement of the Act.

NITE-CHRIP provides information on Specified Substances and Alternatives designated by the Act Enforcement Ordinance Concerning the Protection of the Ozone Layer through the Control and Other Measures on Specified Substances and Other Substances.
Type of Substances
Either of the following is displayed.
Group I in Annex A of the Protocol Attached Table 1-1 of Cabinet Order (A-I)
Group II in Annex A of the Protocol Attached Table 1-2 of Cabinet Order (A-II)
Group I in Annex B of the Protocol Attached Table 1-3 of Cabinet Order (B-I)
Group II in Annex B of the Protocol Attached Table 1-4 of Cabinet Order (B-II)
Group III in Annex B of the Protocol Attached Table 1-5 of Cabinet Order (B-III)
Group I in Annex C of the Protocol Attached Table 1-6 of Cabinet Order (C-I)
Group II in Annex C of the Protocol Attached Table 1-7 of Cabinet Order (C-II)
Group III in Annex C of the Protocol Attached Table 1-8 of Cabinet Order (C-III)
Group I in Annex E of the Protocol Attached Table 1-9 of Cabinet Order (E-I)
Group I in Annex F of the Protocol Attached Table 2-1 of Cabinet Order (F-I)
Group II in Annex F of the Protocol Attached Table 2-2 of Cabinet Order (F-II)
Cabinet Order Number
It is the number given to each substance designated by the Cabinet Order.
Cabinet Order Name
It is the name of the substance designated by the Cabinet Order.
Potential
Ozone-Depleting Potential is shown for Group in Annex A-C,E of the Protocol, and Global Warming Potential is shown for Group in Annex F of the Protocol.
Ozone-Depleting Potential It is the value designated for each Specified Substance by the Cabinet Order, and it is also one of the indices to show the degree of influence on the ozone layer. It indicates the relative value of ozone depletion per 1kg of each compound, where the total amount of ozone depleted by 1 kg of CFC-11(Trichlorofluoromethane) is set to 1.
Global Warming Potential It is the value designated for each Alternative by the Cabinet Order, and it is also one of the indices to show the global warming potential. It indicates the relative value of the global warming potential, expressed in CO2 equivalents.
Air Pollution Control Act
Updated:2024-11-12 (Public Notice 2020-06-05)
The Air Pollution Control Act was enacted in 1968 to preserve the atmospheric environment. This Act stipulates that pollutants discharged by plants and factories must, depending on the scale and type of facility, meet the emission standards for each substance that is discharged.

Substances that are subject to this Act are "Soot and Smoke", "Volatile Organic Compounds(VOC)", "Particulates", "Mercury and its Compounds", "Hazardous Air Pollutants", "Automobile Exhaust",etc.

NITE-CHRIP provides information on chemical substances defined by Act, the Cabinet Order and the Central Environment Council Report, and the Volatile Organic Compounds (VOC) Emission Inventory.
Volatile Organic Compounds (VOC) are based on "Volatile Organic Compounds (VOC) Emission Inventory March 2022" (Volatile Organic Compounds (VOC) Emission Inventory Study Group).
The example substances were listed with reference to the PRTR Law or "ChemiCOCO (Ministry of the Environment)".
Classification
Either of the followings is displayed. One substance may correspond to two or more classifications.
Soot and Smoke (Sulfur Oxides) Soot and Smoke (Sulfur Oxides) mean substances that are generated by the combustion of fuel or other items, that are likely to harm human health or living conditions. Emission standards shall be prescribed for each facility and in each prefecture.
Soot and Smoke (Soot and Dust) Soot and Smoke (Soot and Dust) mean substances that are generated by the combustion of fuel or other items or by the use of electricity as a source of heat, that are likely to harm human health or living conditions. Emission standards shall be prescribed for each facility and in each prefecture.
Soot and Smoke (Hazardous Substances) Soot and Smoke (Hazardous Substances) mean substances that are generated as a result of combustion, synthesis, decomposition, or other processes (excluding mechanical processes), that are likely to harm human health or living conditions, and that are specified by a Cabinet Order. Emission standards shall be prescribed for each facility and in each prefecture.
Designated Soot and Smoke Sulfur oxide and other soot and smoke specified by Cabinet Order for which total volume control standards are set forth in Article 5-2 of the Act.
Volatile Organic Compounds (VOC) Volatile Organic Compounds (VOC) means any organic compound (excluding substances specified by a Cabinet Order as not being sources from which suspended particulate matter or oxidants are generated) that is in a gaseous state at the time of its emission or dispersal into the atmosphere. Emissions standards shall be prescribed as the maximum permissible limits for each type and size of the facilities. VOC stands for Volatile Organic Compounds. (Based on the Ministry of the Environment's "Inventory of Volatile Organic Compounds (VOC) emissions".)
Substances Excluded from Volatile Organic Compounds (VOC) Substances Excluded from Volatile Organic Compounds (VOC) are specified by a Cabinet Order as not being sources from which suspended particulate matter or oxidants are generated.
Particulates Particulates specified by a Cabinet Order that means substances that are generated or dispersed as a result of any mechanical process such as crushing or sorting materials, or as a result of the accumulation of such materials.
Specified Particulates Specified Particulates mean asbestos and any other substance specified by a Cabinet Order that is likely to harm human health. Site Boundary Standards and Activity Standards shall be prescribed by an Ordinance of the Ministry of the Environment as standards for the methods for Activities That Emit, etc. Specified Particulates are done.
Ordinary Particulates Ordinary particulates means particulates other than specified particulates.
Mercury and its Compounds To ensure accurate and smooth implementation of the Minamata Convention on Mercury, emissions of "Mercury and its Compounds" associated with the business activities of factories and workplaces is controlled.
Automobile Exhaust Automobile Exhaust means substances likely to harm human health or living conditions, that are generated during the operation of an automobile among the automobiles; and among the motorized bicycles, and specified by a Cabinet Order.
Specified Substances Specified Substances is specified by a Cabinet Order as likely to harm human health or the living environment. Any person who has in place Specified Facilities that substances generated in the process of synthesis, decomposition, or other chemical processes of substances, include the Specified Substances shall, when a breakdown, damage, or other accident occurs at the Facilities That Generate Soot and Smoke or at the Specified Facilities and a large quantity of Soot and Smoke or a Specified Substances has been emitted into the atmosphere, immediately take emergency measures in response to said accident, and shall endeavor to carry out restoration promptly.
Hazardous Air Pollutants Hazardous Air Pollutants means any substance that is likely to harm human health if ingested continuously and that is a source of air pollution (excluding Soot and Smoke (limited to the items listed under Article 2, paragraph (1), items (i) and (iii) of Act) and Specified Particulates and Mercury and its Compounds).
Hazardous Air Pollutants（Designated Substances） Hazardous Air Pollutants（Designated Substances) (hereinafter 'Designated Substances') is a Hazardous Air Pollutants specified by Cabinet Order as one whose emission and dispersal must be urgently controlled in order to prevent damage to human health. Standards for Controlling Designated Substances shall be established for controlling the emission and dispersal of each type of Designated Substances and each type of Facilities That Emit Designated Substances and shall be made public.
Substances that may be classified as Hazardous Air Pollutants These substances are listed as "substances that may be applicable to Hazardous Air Pollutants" in the report of the Air Environment Subcommittee of the Central Environment Council.
Substances that may be classified as Hazardous Air Pollutants (Priority Action Substances) These substances were listed in the Central Environment Council's Air Pollution Subcommittee Report as "substances that may be classified as Hazardous Air Pollutants" that are considered to pose a somewhat high health risk in light of their degree of hazard and the state of the air environment.
Cabinet Order Number
It is the number assigned to each substance designated by Cabinet Order (or Act or Report).
Cabinet Order Name
It is the name of the substance designated by Cabinet Order (or Act or Report).
Remarks
If the substance definition has remarks, it is displayed.
VOC Emission Inventory Substance Code
Substance code as listed in the "Volatile Organic Compounds (VOC) Emission Inventory".
VOC Emission Inventory Substance Code name
Substance name as listed in the "Volatile Organic Compounds (VOC) Emission Inventory".
Water Pollution Control Act
Updated:2024-09-10 (Public Notice 2024-01-25)
The Water Pollution Control Act was enacted in 1970 to prevent the pollution of public water supplies and underground water. Discharges into public water supplies by plants and factories are categorized so as to indicate the effluent standards of Harmful Substances and the state of water contamination. The establisher of the factories or the workplaces which have Specified Facilities (*1) or Designated Facilities (*2) must, in the event of suspicion of harmfulness pertaining to human health or living environment by damage of those facilitfes and occurrence of other accidents, take emergency measures etc.
(*1) facilities which discharge polluted water or waste liquid, etc.
(*2) facilities which store or use Harmful Substances, or manufacture, store, use or treat Designated Substances

Based on item (1), paragraph (2) of Article 2 of this Law, Harmful Substances are substances specified in Article 2 of the Cabinet Order for Enforcement of the same Law, such as cadmium, that pose a risk of damage to human health.
Based on paragraph (4) of Article 2 of this Law, Designated Substances are substances specified in Article 3-3 of the same Cabinet Order, other than Harmful Substances and oil prescribed in paragraph (5) of Article 2 of this Law that are suspicious of harmfulness to human health or living environment by being discharged to the Public Water Areas in large quantities.
Based on paragraph (5) of Article 2 of this Law, oils are substances specified in Article 3-4 of the Cabinet Order for Enforcement of the same Law.
Based on item (2), paragraph (2) of Article 2 of this Law, Living Condition Items are substances specified in Article 3 of the Cabinet Order for Enforcement of the same Law, such as chemical oxygen demand may cause damage that is likely to negatively affect living conditions.
NITE-CHRIP provides information on the Harmful Substances, Designated Substances, Oils and Living Condition Items defined by the Cabinet Order.
The example substances were listed with reference to the PRTR Law or "ChemiCOCO (Ministry of the Environment)".
Cabinet Order Number
It is the number assigned to each substance designated by Article 2 of the Cabinet Order (Harmful Substances), Article 3-3 of the Cabinet Order (Designated Substances) , Article 3-4of the Cabinet Order(Oils) and Article 2 of the Cabinet Order (Living Condition Items) .
Cabinet Order Name
It is the name of the substance designated by Article 2 of the Cabinet Order (Harmful Substances), Article 3-3 of the Cabinet Order (Designated Substances) , Article 3-4of the Cabinet Order(Oils) and Article 2 of the Cabinet Order (Living Condition Items) .
Effluent Standards
Effluent Standards are threshold limit values (amount of Harmful Substances contained in effluents) that stipulate the effluent standards in Article 1 of the Ministerial Ordinance based on paragraph (1) of Article 3 of the Water Pollution Control Law.
Purification Standards
Purification Standards are the limit values for groundwater quality that the Ministry of the Environment requires to be achieved, and are set for each hazardous substance in accordance with Article 14-3-1 of the Law and Article 9-3 of the Ordinance for Enforcement of the Water Pollution Control Act.
Soil Contamination Countermeasures Act
Updated: 2024-06-04 (Public Notice 2022-12-16)
The Soil Contamination Countermeasures Act was enacted in 2002 to ascertain the state of soil contamination by Designated Hazardous Substances and stipulate preventative measures for human health hazards arising from such contamination.

Designated Hazardous Substances are substances that may pose lead, arsenic, trichloroethylene, and other substances (excluding radioactive substances), designated by Act as to cause harm to human health when present in soil, as designated in Article 1 of the Ordinance for Enforcement of this Act, based on paragraph (1) of Article 2 of the same Act.
Decomposition products are designated hazardous substances that may be generated by decomposition.

NITE-CHRIP provides information on the Designated Hazardous Substances defined by the Cabinet Order and the standards defined by the Ordinance for Enforcement.
The provisions of the Water Pollution Control Actwere confirmed, other relevant substances were listed from the PRTR Law or "ChemiCOCO(Ministry of the Environment)".
Classification
The Designated Hazardous Substances are classified into 3 classes by the Ordinance of the Ministry of the Environment, depending on the nature of the substances.
Class 1 Designated Hazardous Substances: Volatile Organic Compounds
Class 2 Designated Hazardous Substances: Heavy Metals, etc.
Class 3 Designated Hazardous Substances: Other than Class 1 and Class 2 (Agricultural Chemicals, etc. (Agricultural Chemicals & PCBs))
Cabinet Order Number
The number assigned to each Designated Hazardous Substances designated by Article 1 of the Cabinet Order.
Cabinet Order Name
The name of the Designated Hazardous Substances designated by Article 1 of the Cabinet Order.
Soil leachate standard
The amount of the Designated Hazardous Substances eluted when water is added to soil, set from the perspective of the risk of ingestion via groundwater, etc., and listed in Attached table 4 of Ministerial ordinance.
Soil concentration standard
The amount of the Designated Hazardous Substances contained in soil, set from the viewpoint of health risk due to direct ingestion of contaminated soil, and listed in Attached table 5 of Ministerial ordinance.
Decomposition products
Decomposition products are designated hazardous substances that may be generated by decomposition.
The decomposition products listed in the lower part of Attached table 1 of Ministerial ordinance that are generated by the decomposition of the Designated Hazardous Substances.
Act on the Control of Household Products Containing Harmful Substances
Updated: 2024-09-10 (Public Notice 2024-07-31)
The Act on the Control of Household Products Containing Harmful Substances was enacted in 1973 to facilitate the protection of public health by applying regulations that are required from the standpoint of ensuring the health and hygiene of household products containing harmful substances. This Act stipulates standards for harmful substances and designated household products to be subject to regulation.

The harmful substances to be subject to regulation are mercury compounds and other substances that may pose a risk to human health and that are specified in the Cabinet Order designating the substances specified in paragraph (2) of Article 2 of this Act, based on paragraph (2) of Article 2 of the same Act.

Designated household products are household products that, from the standpoint of health and hygiene, have been designated in the Appended Table, etc., of Article 1 of the Ordinance for Enforcement of the Act, based on paragraph (1) of Article 4 of the same Act.

NITE-CHRIP provides information on harmful substances provided for by Cabinet Order of Article 2, paragraph (2) of the Act on the Control of Household Products Containing Harmful Substances.
Cabinet Order Number
It is the number assigned to each substance designated by Cabinet Order.
Cabinet Order Name
It is the name of the substance designated by Cabinet Order.
Applicable Household Goods
Designated household products are household products that have been designated in the Appended Tables, etc., of Article 1 and Article 2 of the Ordinance for Enforcement of the Act, based on paragraph (1) and (2) of Article 4 of the Act.
Standards
The standards of the designated household for the harmful substances are stipulated by Article 1 and 2 of the Ordinance for Enforcement of the Act. The standards include test methods, test equipment, test conditions and so on. In addition, official test methods for measuring the content of hazardous substances, etc., are specified in a separate notification.
Food Sanitation Act
Food Sanitation Act: Table 1 (1) in Appended table 1 of Specifications and Standards Notification; Base polymers (Plastics)
Updated：2020-07-31 (Public Notice 2020-04-28)
A positive list system has been introduced for utensils(*), containers and packaging made from synthetic resins based on paragraph (3) of Article 18 of the Food Sanitation Act. In light of this, the specifications and standards for substances constituting the synthetic resins are listed in Appended Table 1 of "Specifications and Standards for Food, Food Additives, etc. (Ministry of Health and Welfare Notification No. 370, 1959)" (abbreviated as " Specifications and Standards Notification" below). The substances controlled by Specifications and Standards Notification are base polymers that form the basis of synthetic resins and additives that are intended to remain in the final products to alter the physical or chemical properties of the synthetic resins.
More than 98% of the base polymer must be composed of the substances listed in the column of “substance name” in Table 1 (1) or Table 1 (2) in Appended Table 1 of Specifications and Standards Notification. The other parts must be composed of the substances listed in Table 1 (3) of the same table.
Additives are managed according to the classification of synthetic resin and are shown in Table 2 in Appended Table 1 of Specifications and Standards Notification.
Table 1 (1) in Appended table 1 of Specifications and Standards Notification has released information on the base polymers (plastics).

(*) The term “Utensils” corresponds to “Apparatus” in the Food Sanitation Act.
Category
The types of polymers listed in Table 1 (1) in Appended table 1
Number Name
The serial number and the substance name listed in Table 1 (1) in Appended table 1
Food category (Ac | Fa | Mi | Al | Ot)
Food category (Ac | Fa | Mi | Al | Ot) and the contents of each column are as follows.
Ac i Acidic foods foods in or on which the pH of 4.6 or less.
Fa ii Fats/oils and fatty/oily foods foods in or on which the fat or oil contents of 20% or more.
Mi iii Milk/milk products foods that are specified in Article 2 of the Ministerial Ordinance of Milk and Milk Products Concerning Compositional Standards, Etc. (Ordinance of the Ministry of Health and Welfare No. 52 of 1951) and in or on which the fat or oil content is below 20%.
Al iv Alcoholic beverages drinks that contains 1% or more alcohol by volume.
Ot v Other foods foods that are not categorized in i. through iv. above.
○ The UCP (utensils or containers/packaging) containing the substance under the heading of "Substance" as a raw material can be used for the corresponding food category.
- The UCP containing the substance under the heading of "Substance" as a raw material can not be used for the corresponding food category.
Max. Temp./Synth. Resin Gr.
Max. Temp./Synth. Resin Gr. and the contents of each column are as follows.
Maximum Temperature I The temperature of the UCP containing the substances under the heading of "Substance" as a raw material is allowed to be reached up to 70°C.
II The temperature of the UCP containing the substances under the heading of "Substance" as a raw material is allowed to be reached up to 100°C.
III The temperature of the UCP containing the substances under the heading of "Substance" as a raw material is allowed to be over 100°C.
Synthetic Resin Group 1 Polymers categorized in the polymers with a glass-transition temperature or ball pressure temperature of ≥150°C, or categorized in the polymers having a cross-linked structure and with a melting point of ≥150°C (excluding polymers in 4-7).
2 Polymers categorized in the polymers with a water absorption rate of ≤0.1% (excluding polymers in 1 and 4-7).
3 Polymers categorized in the polymers with a water absorption rate of >0.1% (excluding polymers in 1 and 4-7).
4 Polymers 50% or more of whose content is derived from vinyl chloride or vinylidene chloride.
5 Polymers 50% or more of whose content is derived from ethylene.
6 Polymers 50% or more of whose content is derived from propylene.
7 Polymers 50 mol% or more of whose content is derived from terephthalic acid and ethylene glycol.
Requirements
Requirements listed in Table 1 (1) in Appended table 1
Food Sanitation Act: Table 1 (2) in Appended table 1 of Specifications and Standards Notification; Base polymers (Coatings)
Updated: 2020-07-31 (Public Notice 2020-04-28)
A positive list system has been introduced for utensils(*), containers and packaging made from synthetic resins based on paragraph (3) of Article 18 of the Food Sanitation Act. In light of this, the specifications and standards for substances constituting the synthetic resins are listed in Appended Table 1 of "Specifications and Standards for Food, Food Additives, etc. (Ministry of Health and Welfare Notification No. 370, 1959)" (abbreviated as " Specifications and Standards Notification" below). The substances controlled by Specifications and Standards Notification are base polymers that form the basis of synthetic resins and additives that are intended to remain in the final products to alter the physical or chemical properties of the synthetic resins.
More than 98% of the base polymer must be composed of the substances listed in the column of “substance name” in Table 1 (1) or Table 1 (2) in Appended Table 1 of Specifications and Standards Notification. The other parts must be composed of the substances listed in Table 1 (3) of the same table.
Additives are managed according to the classification of synthetic resin and are shown in Table 2 in Appended Table 1 of Specifications and Standards Notification.
Table 1 (2) in Appended Table 1 of Specifications and Standards Notification has released information on the base polymers (coatings).

(*) The term “Utensils” corresponds to “Apparatus” in the Food Sanitation Act.
Category
The types of polymers listed in Table 1 (2) in Appended table 1
Number Name
The serial number and the substance name listed in Table 1 (2) in Appended table 1
Food category (Ac | Fa | Mi | Al | Ot), Max. Temp./Synth. Resin Gr. and the contents of each column
Same as those listed in Food Sanitation Act: Table 1 (1) in Appended table 1 of Specifications and Standards Notification; Base polymers (Plastics)
Requirements
Requirements listed in Table 1 (2) in Appended table 1
Food Sanitation Act: Table 1 (3) in Appended table 1 of Specifications and Standards Notification; Base polymers (Trace amount monomer)
Updated: 2020-07-31 (Public Notice 2020-04-28)
A positive list system has been introduced for utensils(*), containers and packaging made from synthetic resins based on paragraph (3) of Article 18 of the Food Sanitation Act. In light of this, the specifications and standards for substances constituting the synthetic resins are listed in Appended Table 1 of "Specifications and Standards for Food, Food Additives, etc. (Ministry of Health and Welfare Notification No. 370, 1959)" (abbreviated as " Specifications and Standards Notification" below). The substances controlled by Specifications and Standards Notification are base polymers that form the basis of synthetic resins and additives that are intended to remain in the final products to alter the physical or chemical properties of the synthetic resins.
More than 98% of the base polymer must be composed of the substances listed in the column of “substance name” in Table 1 (1) or Table 1 (2) in Appended Table 1 of Specifications and Standards Notification. The other parts must be composed of the substances listed in Table 1 (3) of the same table.
Additives are managed according to the classification of synthetic resin and are shown in Table 2 in Appended Table 1 of Specifications and Standards Notification.
Table 1 (3) in Appended Table 1 of Specifications and Standards Notification has released information on the base polymers (trace amount monomer).

(*) The term “Utensils” corresponds to “Apparatus” in the Food Sanitation Act.
Number Name
The serial number and the substance name listed in Table 1 (3) in Appended table 1
Food Sanitation Act: Table 2 in Appended table 1 of Specifications and Standards Notification; Additives
Updated: 2024-07-31 (Public Notice 2020-04-28)
A positive list system has been introduced for utensils(*), containers and packaging made from synthetic resins based on paragraph (3) of Article 18 of the Food Sanitation Act. In light of this, the specifications and standards for substances constituting the synthetic resins are listed in Appended Table 1 of "Specifications and Standards for Food, Food Additives, etc. (Ministry of Health and Welfare Notification No. 370, 1959)" (abbreviated as " Specifications and Standards Notification" below). The substances controlled by Specifications and Standards Notification are base polymers that form the basis of synthetic resins and additives that are intended to remain in the final products to alter the physical or chemical properties of the synthetic resins.
More than 98% of the base polymer must be composed of the substances listed in the column of “substance name” in Table 1 (1) or Table 1 (2) in Appended Table 1 of Specifications and Standards Notification. The other parts must be composed of the substances listed in Table 1 (3) of the same table.
Additives are managed according to the classification of synthetic resin and are shown in Table 2 in Appended Table 1 of Specifications and Standards Notification.
Table 2 in Appended Table 1 of Specifications and Standards Notification has released information on additives.

(*) The term “Utensils” corresponds to “Apparatus” in the Food Sanitation Act.
Number
The serial number listed in Table 2 in Appended table 1
Name
The substance name listed in Table 2 in Appended table 1
Use Limit by Synthetic Resin Group (%)
"-": The substance is not allowed to be used in the UCP (utensils or containers/packaging) made from base polymers categorized in the corresponding synthetic resin group in Table 1 (1) and (2).
"*": The substance can be used with no limit in the UCP made from base polymers categorized in the corresponding synthetic resin group in Table 1 (1) and (2).
Requirements
Requirements listed in Table 2 in Appended table 1
Remarks
"Remarks" is displayed when it is necessary to confirm that the substance is within the range of the positive list (abbreviated as PL list).
Food Sanitation Act: Table 1 in Appended table 1 of Revised Positive List of Food Apparatus and Containers, Packaging (Base materials)(From June 1, 2025)
Updated: 2024-06-04 (Public Notice 2023-11-30)
Based on Article 18, Paragraph 1 of the Food Sanitation Act, the Standards and Criteria for Foods, Additives, etc. have been partially revised and will be applied from June 1, 2025.　The positive list for synthetic resins has been revised and a new Appended Table 1 has been established as a result of this revision. In the new Appended Table 1, the scope of standards for apparatus, containers and packaging or their raw materials in general has been reorganized as follows.
(1) Table 1 of Appended Table 1 covers polymeric substances in synthetic resins with a molecular weight of 1000 or more and in solid form at normal temperature and pressure (hereinafter referred to as "base materials"). In addition, the usable food categories, operating temperatures, and special notes were deleted.
(2) Table 2 of Attached Table 1 specifies low-molecular-weight organic substances (hereinafter referred to as "additives") that, in principle, have a molecular weight of less than 1000 and are used to change the physical or chemical properties of base materials and are intended to remain in the final product without chemical reaction. However, even those with a molecular weight of 1000 or more are listed in Table 2 as additives if they are liquid at room temperature and pressure, or if they have special functional groups that exert a specific effect on the base material.
(3) Necessary revisions were made including deletion or integration of substance names, and modification of restrictions due to rearrangement of the scope of control of the Positive List for synthetic resins,
Composition of the base material (Annex 1 to 21)
Substance Code Base material (substance name) Description
01-XXX Polymer mainly composed of imide bonds　 Polymer composed of imide bonds of amines (one or more), or amines (one or more) and acid anhydrides (one or more) of this substance code. For this polymer, the essential monomers can be used with the optional substances of this code as needed.
02-XXX Polymer mainly composed of ether bonds Polymer composed of ether bonds of essential monomers (one or more) of this substance code. For this polymer, the essential monomers can be used with the optional substances and/or optional chemical treatments of this code as needed.
03-XXX Cross-linked polymer mainly composed of ester bonds Cross-linked polymer produced by cross-linking the polymers with acids, alcohols, and/or cross-linking agents of this substance code : polymer composed of the acids (one or more), or polymer composed of ester bonds of the acids (one or more) and alcohols (one or more) of this code. For this cross-linked polymer, the essential monomers can be used with the optional substances as needed.
04-XXX Cross-linking polymer of epoxy compound　 Cross-linking polymer of the glycidylated essential monomers (one of more) of this substance code. For this polymer, the essential monomers can be used with the optional substances and/or optional chemical treatments as needed.
05-XXX Polymer mainly composed of carbonate bonds Polymer composed of carbonate bonds of essential monomers of this substance code　(one or more). For this polymer, the essential monomers can be used with the optional substances of this substance code as needed.
06-XXX Polymer mainly composed of siloxane bonds　 Polymer composed of siloxane bonds of essential monomers of this substance code (one or more). For this polymer, the essential monomers can be used with optional substances and/or optional chemical treatments of this substance code as needed.
07-XXX Polymer mainly composed of sulfide bonds Polymer composed of essential monomers of this substance code (one or more). For this polymer, the essential monomers and the optional substances can be used with the optional chemical treatments of this substance code as needed.
08-XXX Polymer composed of fluorine-substituted ethylenes as the main monomer Polymer composed of essential monomers of this substance code (one or more). For this polymer, the essential monomers can be used with the optional substances and/or optional chemical treatments of this substance code as needed.
09-XXX Polymer composed of formaldehyde as the main monomer Polymer composed of essential monomers of this substance code (one or more). For this polymer, the essential monomers can be used with the optional substances and/or optional chemical treatments of this substance code as needed.
010-XXX Polymer with ion exchange ability and/or adsorption ability Polymer composed of essential monomers of this substance code (one or more) with ion exchange ability and/or adsorption ability (excluding those correspond to polymer groups 2 and 4). For this polymer, the essential monomers can be used with optional substances and/or optional chemical treatments of this substance code as needed (including potassium, calcium, sodium, and magnesium salts). Polymer group 1: Polymers with a glass transition temperature or ball pressure temperature ?150°C fall under polymer group 1. (excluding those correspond to polymer groups 2 and 4). Polymer group 3: Polymers with both glass transition temperature and ball pressure temperature <150°C (excluding those correspond to polymer groups 2 and 4).
011-XXX Polymer mainly composed of urethane bonds Polymer composed of urethane bonds of isocyanates (one or more) and alcohols of this substance code (one or more). For this polymer, the essential monomers can be used with the optional substances of this substance code as needed. Polymer group 1: Polymers with a glass transition temperature or ball pressure temperature ?150°C fall under polymer group 1. (excluding those correspond to polymer groups 2 and 4). Polymer group 3: Polymers with both glass transition temperature and ball pressure temperature <150°C (excluding those correspond to polymer groups 2 and 4).
012-XXX Polymer mainly composed of ester bonds Polymer composed of the ester bonds of acids of this substance code (one or more), or acids (one or more) and alcohols of this substance code (one or more). For this polymer, the essential monomers can be used with optional substances and/or following optional chemical treatments of this substance code as needed. Polymer group 1: Polymers with a glass transition temperature or ball pressure temperature ?150°C (excluding those correspond to polymer groups 2 and 4). Polymer group 3: Polymers with both glass transition temperature and ball pressure temperature <150°C (excluding those correspond to polymer groups 2 and 4).
013-XXX Polymer composed of alkenes as the main monomer Polymer composed of essential monomers of this substance code (one or more). For this polymer, the essential monomers can be used with optional substances and/or optional chemical treatments of this substance code as needed.
014-XXX Polymer composed of conjugated diene hydrocarbon as the main monomer Polymer composed of essential monomers of this substance code (one or more). For this polymer, the essential monomers can be used with optional substances and/or optional chemical treatments of this substance code as needed.
015-XXX Polymer composed of aromatic hydrocarbons as the main monomer Polymer composed of essential monomers of this substance code (one or more). For this polymer, the essential monomers can be used with optional substances and/or optional chemical treatments of this substance code as needed. Polymer group 3: Polymers for which the sum of acrylic acid, acrylonitrile, N-phenyl-maleimide, maleic anhydride, and methacrylic acid in the polymer is ?10%. Polymer group 2: Polymers that are other than those categorized in group 3 are categorized in group 2.
016-XXX Polymer composed of acrylic acids as the main monomer Polymer composed of essential monomers of this substance code (one or more). For this polymer, the essential monomers can be used with optional substances and/or optional chemical treatments of this substance code as needed.
017-XXX Polymer mainly composed of amide link (including polymer composed of aziridine or 2-ethyl-2-oxazoline as the main monomer) Polymer composed of amide bonds of amines of this substance code (one or more), or amines (one or more) and acids (one or more) of this substance code (including aziridine or 2-ethyl-2-oxazoline homopolymer). For this polymer, the essential monomers can be used with the optional substances of this substance code as needed.
018-XXX Glucose homopolymer or chemically modified cellulose Polymer composed of essential monomers (one or more), or chemically modified cellulose of this substance code. For this polymer or chemically modified cellulose, the essential monomers can be used with the optional substances and/or optional chemical treatments of this substance code as needed.
019-XXX Hydrolysates of polymer composed of vinyl acetate as the main monomer Hydrolysate of polymer composed of essential monomers of this substance code (one or more). For this hydrolysate of polymer, the essential monomers can be used with the optional substances of this substance cod as needed.
020-XXX Polymer composed of chlorine-substituted ethylene as the main monomer Polymer composed of essential monomers of this substance code (one or more). For this polymer, the essential monomers can be used with optional substances and/or optional chemical treatments of this substance code as needed.
021-XXX Polymer used for coating that involves chemical reaction during film formation Polymer composed of substances of this substance code (one or more). For this polymer, natural components, inorganic compounds, or their derivatives can be used with optional chemical treatments of this substance code as needed.
Substance Code
Substance code for each name listed in the reference information "Reference Information for Monomers, etc. Pertaining to Table 1 of Appendix 1_Annex 1 to 21" on the website of CAA (Consumer Affairs Agency). In the list view, for exapmle, 01-101 is displayed as a number without the initial 0 and the hyphen as 1101.
Base Materials (substance name)
These are the substance names listed in the reference information "Reference Information in Table 1 of Appendix 1" for checking the positive list on the CAA's website.
Classification
The classification of each type of substance listed in the reference information "Reference Information for Monomers, etc. Pertaining to Table 1 of Appendix 1_Annex 1 to 21" on the CAA's website.
Name
The name of each substance listed in the reference information "Reference Information for Monomers, etc. Pertaining to Table 1 of Appendix 1_Annex 1 to 21" on the CAA's website.
Reqirements
The restrictions on the use of each type of substance listed in the "Requirements" column of "Reference Information for Monomers, etc. Pertaining to Table 1 of Appendix 1_Annex 1 to 21" on the CAA's website.
Remarks
Additional reqirements or remarks of each substance listed in the "Requirements" column of "Reference Information for Monomers, etc. Pertaining to Table 1 of Appendix 1_Annex 1 to 21" on the CAA's website.
Polymer group
The polymer group listed in "Reference Information for Table 1 of Appendix 1" on the website of CAA (Consumer Affairs Agency), and is defined as follows.
　　　　　　　　　　　　　　　　　　　　　　　　
Polymer group Description
１ Polymer with a glass transition temperature or ball pressure temperature of 150°C or higher, or with a cross-linked structure and a melting point of 150°C or higher, or other similar items (excluding items falling under Polymer group 2 and 4).
１ or ３ Polymeric or other similar materials whose glass transition temperature or ball pressure temperature is 150℃ or higher (excluding those falling under Polymer group 2 and 4) indicates that the glass transition temperature or ball pressure temperature is below 150°C. Polymeric or other similar materials (excluding those falling under Polymer group 2 and 4) (excluding those falling under Polymer group 2 and 4) are classified as Polymer group 3.
２ Polymer of which main monomer is hydrocarbon (excluding those falling under Polymer group 4)
２ or ３ For the polymer (excluding those falling under Category 4) of which the main monomers are hydrocarbons, if the sum of acrylic acid, acrylonitrile, N-phenyl-maleimide, maleic anhydride, and methacrylic acid constitutes 10% or more of the constituents of the polymer is classified as Polymer group 3, and as Polymer group 2 otherwise.
３ Polymer of which the glass transition temperature and ball pressure temperature are less than 150℃, and other similar substances (excluding those falling under Category 2 and 4)
４ Polymer of which the chlorine-substituted ethylene as the main monomer
４ or ５ The polymer for coating film applications involving a chemical reaction during film formation, and is classified as Polymer group 4 if it contains more than 50% vinylidene chloride and polyvinyl chloride in total, and Polymer group 5 otherwise.
Food Sanitation Act: Table 2 in Appended table 1 of Revised Positive List of Food Apparatus and Containers, Packaging (Additives) (From June 1, 2025)
Updated:2024-07-31 (Public Notice 2023-11-30)
Based on Article 18, Paragraph 1 of the Food Sanitation Act, the Standards and Criteria for Foods, Additives, etc. have been partially revised and will be applied from June 1, 2025.　The positive list for synthetic resins has been revised and a new Appended Table 1 has been established as a result of this revision. Table 2 of the new Appended Table 1 defines the standard criteria for additives, and the amount can be added is determined according to the polymer type of the base materials..
Serial No.
The serial number of the substance listed in the Appended Table 1, Table 2 (Additives), the reference information for checking the positive list on the website of CAA (Consumer Affairs Agency). In the list view, serial numbers, such as 12(1), are indicated by changing them to numbers, such as 12.1.1
Substance name
These are the substance names listed in the Appended Table 1, Table 2 (Additives), the reference information for checking the positive list on the CAA's website.
Use limit by Polymer Group
The use limits (weight %) are determined according to the polymer group of the base material. In this column, "ー" and "*" displayed in addition to weight % have the following meanings.
“－”: This means that the substance is not allowed to be used for the corresponding polymer group.
“＊”: This means an amount of the substance that a business operator specifies, on its own responsibility, for substance(s) classified in
the corresponding polymer group in Table 1 (Base materials) when producing a synthetic resin. The amount should be the minimum level required to exhibit the intended effect.　 When multiple substances are categorized under one serial number and there is no restriction on mixtures of the these substances, mixtures and double salts of them are also included under the serial number. In addition, when a mixture or double salt of multiple substances indicated by the serial number is used, the corresponding use restrictions by polymer group apply to the mixture or double salt.
Requirements
If there are special provisions for the temperature of use, target food, thickness of material, direct contact with food, or matters pertaining to the sum of the amount used, these will be indicated in this Requirements column.
Note for CAS RN
In case the substance defined by the CAS registration number is not clear if it is within the scope of the Positive List, follwing coment will be will be diplayed in this column. "It is required to confirm that the substance falls into the corresponding Positive List substance."
High Pressure Gas Safety Act
Updated: 2023-06-06 (Published 2022-06-22)
The purpose of this Act is to regulate the production, storage, sale, transportation and other matters related to the handling of high pressure gases, their consumption as well as the manufacture and handling of their containers and to encourage voluntary activities by private businesses and the High Pressure Gas Safety Institute of Japan for the safety of high pressure gases with the aim of securing public safety by preventing accidents and disasters caused by high pressure gases.

NITE-CHRIP provides information on chemical substances defined by the Act and Cabinet Order.
Classification
Either of the followings is displayed.
High Pressure Gas The term "high pressure gas" as used in this Act means any gas that falls under any of the following items:

(i)Compressed gas, the pressure (meaning gauge; the same shall apply hereinafter) of which is not less than 1 megapascal at its normal operating temperature and which is currently not less than 1 megapascal, or compressed gas, the pressure of which is not less than 1 megapascal at a temperature of 35 degrees Celsius (except compressed acetylene gas in both cases);

(ii)Compressed acetylene gas, the pressure of which is not less than 0.2 megapascal at its normal operating temperature and which is currently not less than 0.2 megapascal, or compressed acetylene gas, the pressure of which is not less than 0.2 megapascal at a temperature of 15 degrees Celsius;

(iii)Liquefied gas, the pressure of which is not less than 0.2 megapascal at its normal operating temperature and which is currently not less than 0.2 megapascal, or liquefied gas, the temperature of which is 35 degrees Celsius or less in the case that the pressure is 0.2 megapascal; or

(iv)In addition to what is listed in the preceding item, those liquefied gases, the pressure of which exceeds zero Pascal at a temperature of 35 degrees Celsius, and which, inclusive of liquefied hydrogen cyanide and liquefied methyl-bromide, are specified by a Cabinet Order.
Specific High Pressure Gas In the event that any person consumes compressed monosilane, compressed diborane, liquefied arsine or other high pressure gases specifically specified in a Cabinet Order as requiring special care for the prevention of accidents in their consumption, or liquid oxygen and other types of high pressure gases specifically specified in a Cabinet Order as requiring special care for the maintenance of public safety or for the prevention of accidents with respect to the storage and consumption of a certain quantity of such gas.
Class 1 Gas High-pressure gases such as helium, neon, argon, krypton, xenon, radon, nitrogen, carbon dioxide, fluorocarbon (limited to those that meet the flammability standards specified by the Ordinance of the Ministry of Economy, Trade and Industry as having flame retardant properties), or air.
Class 2 Gas Gas other than Class-1 Gas (excluding gas specified by an Ordinance of the Ministry of Economy, Trade and Industry (Class-3 Gas)).
Class 3 Gas Gas specified by an Ordinance of the Ministry of Economy, Trade and Industry under Article 5, Table 2 of the Cabinet Order. (Currently not specified)
Fluorocarbons and Ammonia Fluorocarbons (excluding those conforming to the flammability standards specified by the Ordinance of the Ministry of Economy, Trade and Industry under Article 2, paragraph (3), item (iv)) and ammonia to which the value specified in the table in Article 4 of the Enforcement Order is applied as the refrigeration capacity of equipment for which permission for production must be obtained pursuant to Article 5, paragraph (1), item (ii) of the Law or notification must be given pursuant to Article 5, paragraph (2), item (ii) .
pplicable provisions of Laws and Regulations, etc.
The article number of the Law or Cabinet Order governing the substance will be displayed.
Name in the Ministerial Ordinance
It is the name of substance designated by the Law or the Cabinet Order.
Remarks
If the substance definition has remarks, it is displayed.
High Pressure Gas Safety Act: Regulation on Safety of General High Pressure Gas
Updated: 2023-06-06 (Published 2022-06-22)
The Regulation on Safety of General High Pressure Gas prescribes safety regulations concerning high pressure gas in accordance with the High Pressure Gas Safety Law.(However, they exclude high pressure gas to which the Safety Regulations Concerning Production of High Pressure Gas at Specified Manufacturing Plants and the Refrigeration Safety Regulations and the Liquefied Petroleum Gas Safety Regulations are applied, as provided for in the Safety Regulations for Industrial Complexes, etc.).

The General High Pressure Gas Safety Regulations prescribe safety regulations concerning high pressure gas in accordance with the High Pressure Gas Safety Law.

NITE-CHRIP provides information on chemical substances defined by the Ministerial Ordinance.
Classification
Either of the followings is displayed.
Flammable gas Acrylonitrile, acrolein, acethylene, acetaldehyde, arsine, ammonia, carbon monoxide, ethane, ethylamine, ethylbenzene, ethylene, chloroethene, vinyl chloride, chloromethyl, ethylene oxide, propylene oxide, hydrogen cyanide, cyclopropane, disilane, diborane, dimethylamine, hydrogen, hydrogen selenide, trimethylamine, carbon disulfide, butadiene, butane, butylene, propane, propylene, methyl bromide, benzene, phosphine, methane, monogermane, monosilane, monomethylamine, methyl ether, hydrogen sulfideand any other gas which falls under any of the following (a) or (b) (excluding liquefied fluoroolefin 1234yf and liquefied fluoroolefin 1234ze)

(a)Gas of which the minimum explosive limit (meaning an explosive limit in the case of mixture with air; the same applies hereinafter) does not exceed ten percent.
(b)Gas of which the difference between the upper and lower explosive limits is 20 percent or more.
Toxic gas Acrylonitrile, acrolein, sulfurous acid gas, arsine, ammonia, carbon monoxide, chlorine, chloromethyl, chloroprene, arsenic pentafluoride, phosphorus pentafluoride, ethylene oxide, nitrogen trifluoride, boron trifluoride, phosphorus trifluoride, hydrogen cyanide, diethylamine, disilane, sulfur fluoride, tetrafluorosilane, diborane, hydrogen selenide, trimethylamine, carbon disulfide, fluorine, methyl bromide, benzene, phosgene, phosphine, monogermane, monosilane, monomethylamine, hydrogen sulfide, any other gas that are poisonous substances provided in Article 2 paragraph (1) of the Poisonous and Deleterious Substances Control Act.
Special high pressure gas Arsine, disilane, diborane, hydrogen selenide, phosphine, monogermane or monosilane
Inactive Gas Helium, neon, argon, krypton, xenon, radon, nitrogen, carbon dioxide or fluorocarbon (excluding flammable gas)
Specific Inactive Gases Fluorocarbons among inert gases, which generate flame spread when ignited at a temperature of 60 degrees Celsius and a pressure of 0 Pa.
Applicable provisions of Laws and Regulations, etc.
The article number of the Ministerial Ordinance governing the substance will be displayed.
Name in the Ministerial Ordinance
It is the name of substance designated by the Ministerial Ordinance.
Remarks
If the substance definition has remarks, it is displayed.
High Pressure Gas Safety Act : Regulation on Safety of Refrigeration
Updated: 2023-07-31 (Published 2022-09-12)
Regulation on Safety of Refrigeration is a regulation enacted in 1966. This regulation on Safety of Refrigeration prescribes safety measures for high pressure gas related to refrigeration (including heating using refrigeration equipment) in accordance with the High Pressure Gas Safety Law.

NITE-CHRIP provides information on chemical substances defined by the Ministerial Ordinance.
Classification
Either of the followings is displayed.
Flammable gas Ammonia, isobutane, ethane, ethylene, chloromethyl, hydrogen, n-butane, propane, propylene, and any other gas, which falls under any of the following (a) or (b)

(a)Gas of which the minimum explosive limit (meaning an explosive limit in the case of mixture with air; the same applies hereinafter) does not exceed ten percent; or
(b)Gas of which the difference between the upper and lower explosive limits is 20 percent or more.

Toxic gas Ammonia, chloromethyl and any other gas that are poisonous substances provided in Article 2, paragraph (1) of the Poisonous and Deleterious Substances Control Act.
Inactive gas Helium, neon, argon, krypton,xenon, radon, nitrogen, or fluorocarbon (excluding flammable gas)
Specific inactive gas Inactive fluorocarbon gases, which generate flame spread when ignited at a temperature of 60 degrees Celsius and a pressure of zero pascal.
Refrigerant gas Refrigerant gases specified in the tables of Article 5, item 3 and 4 of the Ministerial Ordinance
Applicable provisions of Laws and Regulations, etc.
The article number of the Ministerial Ordinance governing the substance will be displayed.
Name in the Ministerial Ordinance
It is the name of substance designated by the Ministerial Ordinance.
Remarks
The refrigerant number (ASHRAE Standard 34) of the refrigerants containing the relevant substance is displayed.
Explosives Control Act
Updated: 2023-07-31 (Published 2023-06-09)
The Explosives Control Law was enacted in 1950 to prevent disasters caused by explosives and ensure public safety by regulating the manufacture, sale, storage, transportation, consumption, and other handling of explosives.

The term "explosives" refers to explosives, blasting explosives and pyrotechnics. The term "Toy fireworks" refers to fireworks for toys and other similar fireworks as specified by the Ordinance of the Ministry of Economy, Trade and Industry.

NITE-CHRIP discloses information on the following substances specified by the law.
Classification
Either of the followings is displayed.
Low Explosives (a) Black powder and other nitrate-based explosives
(b) Smokeless powder and other nitrate-based explosives
(c) Other explosives used for propulsive explosions equivalent to the low explosives listed in (a) or (b) and specified by the Ordinance of the Ministry of Economy, Trade and Industry.
High Explosives (a) Mercury fulminate, lead azide and other primary explosives
(b) Nitrate, potassium chlorate, Carlit and other nitrate, chlorate or perchlorate based blasting high explosives
(c) Nitroglycerin, nitroglycol and other nitrate esters used for blasting high explosives
(d) Dynamite and other nitrate ester-based blasting high explosives
(e) Trinitrobenzene, trinitrotoluene, picric acid, trinitrochlorobenzene, tetryl, trinitroanisole, hexanitrodiphenylamine, trimethylenetrinitroamine, other nitro compounds containing three or more nitro groups and blasting high explosives mainly composed of them, used for explosion
(f) Liquid oxygen blasting explosives and other liquid high explosives
(g) Other blasting explosives which are used for destructive explosions equivalent to the high explosives listed in (a) to (f) inclusive, and which are specified by the Ordinance of the Ministry of Economy, Trade and Industry
Pyrotechnics (a) Industrial detonators, electric detonators, gun detonators, and signal detonators
(b) live and blank packages
(c) fuses and fire tubes
(d) Detonating fuses, fuses and electric fuses
(e) signal flares and signal fire cables
(f) Smoke guns and other pyrotechnic devices using gunpowder or explosives listed in the preceding two items (excluding those specified by the Ordinance of the Ministry of Economy, Trade and Industry)
Toy Fireworks Fireworks for toys and other similar fireworks as specified by the Ordinance of the Ministry of Economy, Trade and Industry.
Applicable provisions of Laws and Regulations, etc.
The article number of the Law governing the substance will be displayed.
Name in Laws and Regulations, etc.
It is the name of substance designated by the Law.
Product name
It is the name of the explosives publicized in the Public Notice.
Remarks
If the substance definition has a note, it is displayed.
UN Number; Class; Compatibility group; Packing group
It is "UN Number", "Class", "Compatibility group", and "Packing group" as described in the Public Notice.
UN Number It is the four-digit number assigned to classify substances or articles that are considered dangerous or hazardous for transportation according to the "Recommendations on the Transport of Dangerous Goods" prepared by the United Nations Committee of Experts on the Transport of Dangerous Goods. For substances with more than one UN number, a number is assigned corresponding to the class and compatibility group as specified in Remarks 1 (2) and (3) of the Appendix of the Notification.
Class The class is defined by the Notification. If there is multiple class for the same product, the class is determined by the test methods specified in JIS K4828-1 (1998), JIS K4828-2 (2003), or JIS K4828-3 (1998).
Compatibility group The compatibility group is defined by the Notification. If there is multiple compatibility group for the same product, the determination is made according to the table in Remark 1 of the Appendix of the Notification. If the compatibility group is N and S, the classification is determined by the test methods specified in JIS K4828-1 (1998), JIS K4828-2 (2003), or JIS K4828-3 (1998).
Packing group It is the symbol for the container packaging method listed in the table in Remarks 2 of the Appended Table of the "Public notice".
Fire Service Act
Fire Service Act was established in 1948. The purpose of this Act is to prevent, guard against, and suppress fires in order to protect the lives, bodies and property of citizens from fires, and to reduce the damage arising from fires or disasters such as earthquakes, thereby maintaining peace and order and contributing to the promotion of social and public welfare.
Sources
The sources of information cited mainly regarding the determination of exemplified substances are as follows.
"Hazardous Materials Disaster Information Support System" Ministry of Internal Affairs and Communications Fire and Disaster Management Agency Site
"Hazardous Materials Data Book 2nd edition" Editor; Tokyo United Fire Protection Association Supervised; Tokyo Fire Department, Police Defense Research Institute
"MHLW Website; Sample SDS" Ministry of Health, Labor and Welfare Site
"Encyclopedia of Hazardous Materials" General editor; Tamura Masamitsu, Publisher; Asakura-Shoten

Source information may have been partially revised regarding terminology, etc.
Disclaimer : Classification of exemplified Hazardous Materials is based on the respective source information, and no tests have been done by NITE for evaluation. For classifying actual products, it is the business operator's responsibility to test and evaluate before classifying them.
Fire Service Act : Hazardous Materials
Updated: 2024-11-12
Hazardous Materials are items listed in the material name column of Appended Table 1 of the Act, and have the properties listed in the property column of the same table according to the classification specified in the same table (Article 2 of the Act). In the "Other items specified by Cabinet Order" listed in this material name column, the names are specified in Cabinet Order Concerning the Control of Hazardous Materials (HM Ordinance), and items that are considered to have the same level of danger are specified. In addition, the designated quantity, which serves as a guide to dangerousness, is stipulated in Attached Table 3 of this HM Ordinance.
Number of cabinet order etc.
Article number and attached table number of the Act and/or HM Ordinance.
Category; Property
The categories and properties specified in Appended Table 1 of the Act are listed together.
　　　　　　　　　　　　　　　　　　　　　　　　
Category; Property Notes on Appended Table 1 of the Act
Category I; Oxidizing Solids Solids [substances other than liquids (substances forming liquids at a temperature of 20℃ at 1atm. pressure or substances which are liquefied at a temperature exceeding 20℃ but not higher than 40℃; the same shall apply hereinafter) or gases (substances forming gases at a temperature of 20℃ at 1atm. pressure); the same shall apply hereinafter] which show the properties which are specified by a cabinet order in tests specified by a cabinet order to determine the potential hazards of oxidizing power or which show the properties which are specified by a cabinet order in tests specified by a cabinet order to determine the sensitivity to impacts.
Category II; Combustible Solids Solids which show the properties specified by a cabinet order in tests specified by a cabinet order to determine the hazards of ignition from flame or solids which show inflammability in tests specified by a cabinet order to determine the hazards of flashing.
Category III; Spontaneously Combustible Substances and Water-Prohibitive Substances Solids or liquids which show the properties specified by a cabinet order in tests specified by a cabinet order to determine the hazards of ignition in air or those which ignite in contact with water or those which show the properties specified by a cabinet order in tests specified by a cabinet order to determine the hazards of generating combustible gases.
Category IV; Inflammable Liquids Liquids (in the case of Class III petroleums, Class IV petroleums and animal fats and vegetable oils, limited to those which are liquids at a temperature of 20℃ at 1atm. pressure) which show inflammability in tests specified by a cabinet order to determine the hazards of inflammability.
Category V; Self-Reactive Substances Solids or liquids which show the properties specified by a cabinet order in tests specified by a cabinet order to determine the hazards of explosion or those which show the properties specified by a cabinet order in tests specified by a cabinet order to determine the intensity of thermolysis.
Category VI; Oxidizing Liquids Liquids which show the properties specified by a cabinet order in tests specified by a cabinet order to determine the potential hazards of oxidizing power.
Item
The name specified in Attached Table 1 of the Act.
*Category IV; Inflammable Liquids, whose items cannot be identified because of their flash point unknown, are listed as (Non-classified inflammable liquid with flash point unknown).
*The priority of Hazardous Materials that fall into two or more categories is determined as follows in the regulations regarding the regulation of Hazardous Materials. However, CHRIP may list more than one item name in the source regardless of the regulation.
(Items having multiple properties)
Article 1-4 　Pursuant to the provisions of Appended Table 1 Remarks (21) of the Act, the item to which materials having two or more of the properties listed in the property column of the same table (hereinafter referred to as "multiple property materials" in this article) belongs is,　according to the classification listed in each of the following, the item listed in each shall be used.
(i) For multiple property materials having the properties of Oxidizing Solids and Combustible Solids: Item of Category II (8) of Appended Table 1 of the Act.
(ii) For multiple property materials having the properties of an Oxidizing Solids and Self-Reactive Substances: Item of Category V (11) of Appended Table 1 of the Act.
(iii) For multiple property materials having the properties of Combustible Solids, and Spontaneously Combustible Substances and Water-Prohibitive Substances: Item of Category III (12) of Appended Table 1 of the Act
(iv) For multiple property materials having the properties of Spontaneously Combustible Substances and Water-Prohibitive Substances, and Inflammable Liquids: Item of Category III (12) of Appended Table 1 of the Act.
(v) For multiple property materials having the properties of Inflammable Liquids and Self-Reactive Substances: Item of Category V (11) of Appended Table 1 of the Act.
Property
The property specified in Attached Table 3 of HM Ordinance.
Designated quantity
This is the quantity specified in Attached Table 3 of HM Ordinance. When different designated quantities of Hazardous Materials are stored or handled in the same place, divide the quantity of each Hazardous Materials involved in the storage or handling by the designated quantity of the Hazardous Materials, and if the sum of the quotients is 1 or more, the relevant place shall be deemed to store or handle hazardous materials in excess of the Designated quantity.
Remarks
Conditions and other information about the target substance is displayed.
Fire Service Act : Designated Flammable Goods
Updated: 2024-07-31
Designated Flammable Goods of the Fire Service Act are straw products, wood wool, and other materials that are, if a fire breaks out the fire will spread rapidly or make fire extinguishing activities extremely difficult. This is stipulated by Cabinet Order Concerning the Control of Hazardous Materials (HM Ordinance) (Article 9-4 of the Act).By the attached table 4 of HM Ordinance, name of Designated Flammable Goods and the applicable quantities are determined, in consideration of the dangers of each item.
Number of cabinet order etc.
Article number and attached table number of HM Ordinance.
Item
The name specified in Attached Table 4 of HM Ordinance.
Stipulated quantity
This is the quantity stipulated in Attached Table 4 of HM Ordinance.
Remarks
Conditions and other information about the target substance is displayed.
Fire Service Act : Substances that inhibit firefighting activities
Updated: 2024-09-10
Substances that inhibit firefighting activities under the Fire Service Act are compressed acetylene gas, liquefied petroleum gas, and other substances that may seriously impede fire prevention or firefighting activities. They are defined by the articles of Cabinet Order Concerning the Control of Hazardous Materials (HM Ordinance) and the attached Tables 1 and 2 of the ordinance. In addition, applicable substances and the quantities subject to notification are determined by Ordinance of the Ministry of Internal Affairs and Communications (MIC Ordinance).
Number of cabinet order etc.
Article number and attached table number of HM Ordinance and/or MIC Ordinance.
Substances
Substances specified by HM Ordinance or MIC Ordinance.
Stipulated quantity
Stipulated quantity specified by HM Ordinance or MIC Ordinance.
Lao PDR
Decision on Substance and Industrial Chemical Management
Laws and regulations Overview
This decision is made in order to define principles, regulations and basic standards necessary for managing and inspecting substances and hazardous chemicals towards ensuring highest degree of protection and safety in the production process (production steps, production techniques, containing and packaging), trade (import, export, transportation and distribution), storage, use, confining and treatment of all types of substance and hazardous chemicals in the manufacturing and handicraft industries.

Type I dangerous substances and chemicals are most dangerous substances and chemicals with which no business operation regarding import, utilization, production and storage is allowed under normal situations. When it is highly necessary to use any substances or chemicals in this category for research purpose, the concerned authority has to submit the application for use such substances and chemicals to the industry and handicraft section for consideration and seek approval from the government.
Type II dangerous substances and chemicals are moderately dangerous substances and chemicals which can be traded and utilized under special control. That is, before importing and trading substances and chemicals in this Type II category, the business owner has to register their products with Department of Industry and Handicraft and seek for a technical certificate from the industry and handicraft sector.
Type III dangerous substances and chemicals are mildly dangerous substances and chemicals which can be traded and used normally, but the business owners have to register themselves with the industry and handicraft sector.
Category
- Type I
- Type II
- Type III
Regulation on the Control of Pesticides in Lao PDR
Laws and regulations Overview
This regulation defines the principles, rules, and measures for controlling activities that involve pesticides in Lao PDR in order to protect human, animal and plant health, and the environment, and to be harmonized with international obligations and regulations in which Lao PDR is contracting party.
List of banned pesticides in Lao PDR, June 2010
Banned pesticide means a pesticide for which all uses have been prohibited by final regulatory action, in order to protect human health or the environment. The term includes a pesticide that has been refused approval for first-time use, or had been withdrawn by industry either from the domestic market or from further consideration in the domestic approval process, and where there is clear evidence that such action has been taken in order to protect human health or the environment.
Category
- Insecticides and acaricides
- Fungicides
- Rodenticides
- Herbicides
- Fumigants
- Others
Malaysia
Classification, Labelling and Safety Datasheet of Hazardous Chemical (CLASS) Regulation 2013
Laws and regulations Overview
1. This regulations are drafted based on GHS 3rd revised edition.
2. This regulations are applicable to all chemicals supplied to workplace.
3. This regulations describe the responsibility of suppliers of chemicals to classify the chemicals, package and label properly and provide proper safety data sheet.
4. Further description on the requirement of this regulations can be obtained from the Industrial Code of Practice Chemicals Classification and Hazard Communication (ICOP CHC)
Use and Standards of Exposure of Chemicals Hazardous to Health (USECHH) Regulation 2000
Laws and regulations Overview
1. This regulations describe the responsibility of the employer to ensure that the chemicals used at the workplace are managed properly.
2. This regulations aims to control the exposure of chemicals hazardous to health at the workplace.
3. The exposure of chemicals hazardous to health is to be kept at the agreed level to ensure the safety and health of employee.

Schedule I is a List of Chemical permissible exposure limit at workplace
Schedule II is a List of chemical which Medical Surveillance is appropriate
Category
- Schedule I
- Schedule II
(Prohibition of Use of Substance) Order 1999
Laws and regulations Overview
1. This order is a list of chemicals that have been banned for used at the workplace
2. Each chemicals is prohibited from being used according to the activity listed.
(Control of Industrial Major Accident Hazards) Regulations 1996
Laws and regulations Overview
1. This regulations aim to categorise the industries into major hazard installation or non-major hazard installation.
2. Industries categorised as major hazard installation will have to prepare report on the industrial activity as well as the emergency plans installed.
3. The criteria to categorise the industries as well as the points needed for the reports are provided in the schedules attached.
Myanmar
Prevention of Hazard from Chemical & Related Substances Law
Laws and regulations Overview
This law focuses on protection to any living beings and natural environment resources, safety, and sustainable development for the occupational safety, health, and environmental conservation.
List of Restricted Chemical
Updated: 2019-11-26
  Promulgated: 2016-06-30
  Enforcement: 2016-06-30
Restricted Chemical means the hazardous chemical and related substances which are specially controlled for health and safety of the human beings.
The 26 numbers of Controlled Precursor Chemical, Hydro-chloro-fluro-carbon (HCFC), Mercury and Sodium Cyanide, totally, the 29 numbers of chemical are specified as the Restricted Chemicals under section 5, sub-section (h) of Prevention of Hazard from Chemical and Related Substances Law.
List of Prohibited Chemical
Updated: 2019-11-26
  Promulgated: 2016-06-30
  Enforcement: 2016-06-30
Prohibited Chemical means the chemical and related substances which are produced, used and imported only by the State for the cases of doing the scientific research and eradicating the contagious disease.
The 26 numbers of Persistent Organic Pollutants (POPs), Chloro-fluro-carbon (CFC), the 26 numbers of Prior Informed Consent pesticide and the 12 numbers of chemical in Schedule-1 of Chemical Weapon Convention, totally, the 65 numbers of chemical are specified as the Prohibited Chemicals under section 5, sub-section (h) of Prevention of Hazard from Chemical and Related Substance Law.
Philippines
Toxic Substances and Hazardous and Nuclear Wastes Control Act (RA6969)
Laws and regulations Overview
RA 6969
An Act to Control Toxic Substances and Hazardous and Nuclear Wastes, Providing Penalties for Violations Thereof, and for Other Purposes

Section 1. Short Title
This Act shall be known as the “Toxic Substances and Hazardous and Nuclear Wastes Control Act of 1990”

Section 2. Declaration of Policy
It is the policy of the state to regulate, restrict or prohibit the importation, manufacture, processing, sale, distribution, use and disposal of chemical substances and mixtures that present unreasonable risk and/or injury to health or environment; to prohibit the entry, even in transit, of hazardous an nuclear wastes and their disposal into the Philippines territorial limits for whatever purpose; and to provide advancement and facilitate research and studies on toxic chemicals.

Section 3. Scope
This Act shall cover the importation, manufacture, processing, handling, storage, transportation, sale, distribution, use and disposal of all unregulated chemical substances and mixtures in the Philippines, including the entry even in transit, as well as the keeping or storage and disposal of hazardous and nuclear wastes into the country for whatever purposes.
Priority Chemical List
DENR Administrative Order No. 58, Series of 1998 Priority Chemical List
DENR Administrative Order No.27, Series of 2005 Revised Priority Chemical List
DENR Administrative Order No. 23, Series of 2007 Prescribing Additional Information for the Issuance of PCL Compliance Certificate
Memorandum Circular No. 003, Series of 2014 Supplemental Guidelines for DAO 2007-23
Chemical Control Order
DENR Administrative Order No. 38, Series of 1997 Chemical Control Order for Mercury and Mercury Compounds
DENR Administrative Order No. 39, Series of 1997 Chemical Control Order for Cyanide and Cyanide Compounds
DENR Administrative Order No. 02, Series of 2000 Chemical Control Order for Asbestos
DENR Administrative Order No. 01, Series of 2004 Chemical Control Order for Polychlorinated Biphenyls
DENR Administrative Order No. 24, Series of 2013 Chemical Control Order for Lead and Lead Compounds
DENR Administrative Order No. 18, Series of 2000 Chemical Control Order for Ozone Depleting Substances
DENR Administrative Order No. 08, Series of 2004 Revised Chemical Control Order for Ozone Depleting Substances
DENR Administrative Order No. 25, Series of 2013 Revised Regulation on the Chemical Control Order for Ozone Depleting Substances
The Philippine Inventory of Chemicals and Chemical Substances (PICCS)


Republic Act 9165 Comprehensive Dangerous Drugs Act of 2002
Laws and regulations Overview
AN ACT
INSTITUTING THE COMPREHENSIVE DANGEROUS DRUGS ACT OF 2002, REPEALING
REPUBLIC ACT NO. 6425, OTHERWISE KNOWN AS THE DANGEROUS DRUGS ACT OF 1972, AS AMENDED, PROVIDING FUNDS THEREFOR, AND FOR OTHER PURPOSES

SECTION 1. Short Title
This Act shall be known and cited as the “Comprehensive Dangerous Drugs Act of 2002”.

SECTION 2. Declaration of Policy
It is the policy of the State to safeguard the integrity of its territory and the well-being of its citizenry particularly the youth, from the harmful effects of dangerous drugs on their physical and mental well-being, and to defend the same against acts or omissions detrimental to their development and preservation. In view of the foregoing, the State needs to enhance further the efficacy of the law against dangerous drugs, it being one of today's more serious social ills.

Toward this end, the government shall pursue an intensive and unrelenting campaign against the trafficking and use of dangerous drugs and other similar substances through an integrated system of planning, implementation and enforcement of anti-drug abuse policies, programs, and projects.

The government shall however aim to achieve a balance in the national drug control program so that people with legitimate medical needs are not prevented from being treated with adequate amounts of appropriate medications, which include the use of dangerous drugs.

It is further declared the policy of the State to provide effective mechanisms or measures to reintegrate into society individuals who have fallen victims to drug abuse or dangerous drug dependence through sustainable programs of treatment and rehabilitation.
Category
- Table I Controlled Precursors and Essential Chemical (CPEC)
- Table II Controlled Precursors and Essential Chemical (CPEC)
- Classified under Sec 93 Article XI, RA 9165
Thailand
Hazardous Substances Act
Laws and regulations Overview
List 5.1 Controlled Substances （List 5: Responsible by Department of Industrial Works）
Category
List 5.1 Controlled Substances
Category
- Type 1
- Type 2
- Type 3
- Type 4
Vietnam
Law on Chemical
Laws and regulations Overview
The Law provides regulations on chemical handling, safety in chemical handling, right and obligations of organizations and individuals engaged in chemical handling, and state management of chemical handling.
Decree 113/2017/ND-CP: List of chemicals subject to conditional industrial production and trading
Updated: 2020-01-28
  Law on Chemical: Promulgation 2007-11-21
  Decree 113/2017/ND-CP: Promulgation 2017-10-09
  Circular 32/2017/TT-BCT: Promulgation 2017-12-28
Chemicals subject to conditional production and trading are dangerous chemicals which are under requirements of specially control on safety techniques in production and trading.
Decree 113/2017/ND-CP: List of chemicals subject to be restricted in industrial production and trading
Updated: 2020-01-28
  Law on Chemical: Promulgation 2007-11-21
  Decree 113/2017/ND-CP: Promulgation 2017-10-09
  Circular 32/2017/TT-BCT: Promulgation 2017-12-28
Chemicals subject to restricted production and trading are dangerous chemicals which are under specially control on safety techniques; entities' scale; type, size and period of business in order to ensure safety for security and defence, human health, property and environment.
Decree 113/2017/ND-CP: List of banned chemicals
Updated: 2020-01-28
  Law on Chemical: Promulgation 2007-11-21
  Decree 113/2017/ND-CP: Promulgation 2017-10-09
  Circular 32/2017/TT-BCT: Promulgation 2017-12-28
Chemicals specified in the list of prohibited chemicals issued by the Government.
Decree 113/2017/ND-CP: List of chemicals which require developing plan to respond and prevent chemical incident
Updated: 2020-01-28
  Law on Chemical: Promulgation 2007-11-21
  Decree 113/2017/ND-CP: Promulgation 2017-10-09
  Circular 32/2017/TT-BCT: Promulgation 2017-12-28
Hazardous chemicals subjected to accident prevention and mitigation plan.
Decree 113/2017/ND-CP: List of chemicals subject to compulsory declaration
Updated: 2020-01-28
  Law on Chemical: Promulgation 2007-11-21
  Decree 113/2017/ND-CP: Promulgation 2017-10-09
  Circular 32/2017/TT-BCT: Promulgation 2017-12-28
Chemicals subject to declaration of import/production.
Decree 73/2018/ND-CP dated 15th May 2018
Regulations on drug and drug precursors: List of drug precursors
Updated: 2020-01-28
Annex 4 - Decree 73/2018/ND-CP.
World Customs Organization
HS Code: Section VI “Products of the Chemical or Allied Industries”
Updated : 2023-01-31 (2022 edition)
The HS Code composed by 6 digits is used to facilitate global trade by providing unified categories to classify various types of goods, and this harmonization is intended to reduce the costs occurred during international trade.

The system comprises approximately 5,300 commodity groups, which are divided into 21 Harmonized System Sections and 99 Chapters (Chapters 98 and 99 are not specified, to allow for national use). The Sections and Chapters can be found on the website of the World Customs Organization (WCO).

The core HS Code is composed of 6 digits. The first two digits indicate the chapter the good belongs to. The middle two digits specify the heading which indicates the category within the chapter. The last two digits identify the sub-heading which designates the more specific subcategory the product is categorized in.

Countries that have adopted the Harmonized System may use up to 10 digits in their codes, with specified additional digits for national purposes.

The HS Committee of the WCO amends the HS every 5-6 years. The latest amendment is the HS Nomenclature 2022 Edition (see here).

Chemicals and chemical products are listed in the Section VI of the Harmonized System. There are 11 chapters related to chemicals and chemical products (Chapters 28 to 38). Inorganic substances and organic substances are usually classified in Chapter 28 and Chapter 29. Chemical mixtures are generally classified in Chapters 30 to 38 based on their intended usage.

AJCSD provides information on Chapter 28 (see here ) and Chapter 29 (see here ).
Chapter
It is the chapter that the first two digits of the HS Code denote.
Chapter Name
It is the chapter name that the substance belongs to.
Heading
It is the Heading that the middle two digits of the HS Code plus first two digits denote.
Substance Name (Heading)
It is the Substance name that the Heading belongs to.
HS Code
It is the HS Code composed by 6 digits.
Substance Name (HS Code)
It is the Substance name that the HS Code belongs to.
Screening Assessment Information
Japan
The Screening Assessment under the CSCL for Human Health
Updated : 2019-03-19 (2017 edition)
Under the CSCL in Japan, a screening assessment is conducted by the government for all general chemicals among the Existing and New Chemical Substances (Japan ENCS), and those identified as high priorities for risk assessment are designated as the Priority Assessment Chemical Substances (PACS) . During the screening assessment, a hazard class for human health is assigned based on the hazard classes of four types of toxicities (general toxicity, reproductive toxicity, mutagenicity, and carcinogenicity). You can see the classification criteria on the linked page (see here).
There are 5 hazard classes for human health (1, 2, 3, 4, and Out of Classification). A smaller value indicates more hazardous.
Assessment Substance
This is the name of the substance subject to the hazard assessment. The hazard assessment was conducted by CAS RN.
Hazard Class
This is the hazard class of the substance.
Assessment Year
This is the year when the hazard class was assigned by the hazard assessment.
The Screening Assessment under the CSCL for the Environment
Updated : 2019-03-19 (2017 edition)
Under the CSCL in Japan, a screening assessment is conducted by the government for all general chemicals among the Existing and New Chemical Substances (Japan ENCS), and those identified as high priorities for risk assessment are designated as the Priority Assessment Chemical Substances (PACS). During the screening assessment, a hazard class for the environment is assigned based on chronic and acute toxicities for algae, Daphnia, and fish. You can see the classification criteria on the linked page (see here).
There are 5 hazard classes for the environment (1, 2, 3, 4, and Out of Classification). A smaller value indicates more hazardous.
Assessment Substance
This is the name of the substance subject to the hazard assessment. The hazard assessment was conducted by CAS RN.
Hazard Class
This is the hazard class of the substance.
Assessment Year
This is the year when the hazard class was assigned by the hazard assessment.
Chemical Hazard and Risk Information
NITE Japan-GHS
Updated: 2024-07-31（Original Data Last Updated :2024.06.21）
"NITE Japan-GHS" is an integrated version of the "GHS Classification Results by Japanese Government". The substances that were reclassified multiple times, only the latest results are combined. (Therefore, basically it is one file for one substance, but some of them are divided into two files depending on the form and condition of the substance.）
Further information is available from the following link.
https://www.chem-info.nite.go.jp/chem/english/ghs/ghs_index.html
Edition
The value (version) is updated when the substance has been reclassified by the Japanese government. The version 1 is a compilation of the "GHS Classification Results by the Japanese Government" published by the fiscal year 2019. And also when the substance has been newly classified after the fiscal year 2019 the edition is version 1.
Chemical Substance Name
The displayed name is an English translated substance name used by the Japanese government GHS classification.
Classification Result
You can see the classification results (HTML and Excel) of the substance.
Japan
GHS Classification Results by the Japanese Government
Updated : 2024-07-31 (Original Data Last Updated 2024-06-21)
This classification has been conducted in accordance with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) by the Japanese government's GHS Classification Project since 2006. The data include the following: classification, symbol, signal word, and hazard statement.
Further information about the GHS including Japan's classification is available from the following link.
GHS Information
Year of implementation / renewal
The displayed number is a Japanese fiscal year, from April 1 to March 31 of the following year, and it means that the GHS classification of the substance was implemented or renewed in the year.
Chemical Substance Name
The displayed name is an English translated substance name used by the Japanese government GHS classification.
Classification Result
You can see the GHS classification results of the substance.
Remarks
If several classification results of different years are available and one of the results is displayed with "latest" but limited to part of hazard classes, a supplemental explanation of how to refer the results will be shown.
Chemical Substances Hazard Assessment Report / Initial Risk Assessment Report
Updated :
  2009-06-30 (Issued 2009-03) (Chemical Substances Hazard Assessment Report) /
  2009-01-29 (Issued 2008-12) (Initial Risk Assessment Report) /
  2013-04-25 (Issued 2010-05) (Summary of Initial Risk Assessment Report)
Chemical Substances Hazard Assessment Reports are chemical substance assessment documents that are published following deliberations by experts. They are based on chemical substance safety information obtained from documents, reports, etc. There are three types:

1) Those prepared from the Technological Development of Chemical Substance Risk Assessment Methods project, which was undertaken as part of the Comprehensive Chemical Substance Assessment and Management Program commissioned by NEDO (New Energy and Industrial Technology Development Organization). These assessment reports are published following deliberations by the Management Committee & Review Committee Chemical Substance Council's Safety Assessment and Management Subcommittee.

2) Those originally prepared by NITE based on the Guidelines for Initial Risk Assessment Reports and the Preparation Manual for Initial Risk Assessment Reports that were used in the above-mentioned project. The content of these assessment reports is deliberated upon by the same committee as for the above-mentioned project.

3) Those prepared as a result of the following project commissioned by the Ministry of Economy, Trade and Industry (METI): Ensuring the Safety of Chemical Substances / Promotion of International Regulation Countermeasures, etc., 2008 (Survey regarding the Toxicity of Designated Chemical Substances specified in the Act on Confirmation, etc. of Release Amounts of Specific Chemical Substances in the Environment and Promotion of Improvements to the Management Thereof). These reports are published following deliberations by the Hazard Assessment Committee that was established during the conducting of the survey.

The Initial Risk Assessment Report is a report created based on the initial risk assessment methods developed by NEDO in its Chemical Substance Risk Assessment and Risk Assessment Method Development Project. These assessment methods are compiled in the Guidelines for Initial Risk Assessment Reports (theory of assessment) and the Preparation Manual for Initial Risk Assessment Reports (concrete steps for preparing assessment reports).
Report Number
If the Assessment Report No. is displayed, it means the Assessment Report of the substance is published.
Assessed Chemical Substance Name
The substance name appearing in the title of an assessment report is displayed.
Details
You can link to the Reports of the substance in PDF files as follows.
* Hazard Assessment Report (in Japanese)
* Initial Risk Assessment Report (in Japanese)
* Summary of Initial Risk Assessment Report (in English)
Date of publication/renewal when the Report(s) was/were released or updated are also displayed.
Malaysia
GHS Classification Results in Malaysia
GHS Classification Results by the Malaysian Government. All classification results are available here.
The Malaysian Government also disclose the classification results in https://cims.dosh.gov.my/
Myanmar
GHS Classification Results in Myanmar
Updated: 2020-03-17
GHS Classification Results by the Myanmar Government.
GHS classification is mandatory according to the chapter (11) of The Prevention of Hazard from Chemical and Related Substances Rules.
Sample Labelling (the Myanmar government)
Updated: 2020-01-28
Sample Labelling by the Myanmar Government.
GHS classification is mandatory according to the chapter (11) of The Prevention of Hazard from Chemical and Related Substances Rules.
Vietnam
Sample SDS by the Vietnam government
Updated: 2020-01-28
  Law on Chemical: Promulgation 2007-11-21
  Decree 113/2017/ND-CP: Promulgation 2017-10-09
  Circular 32/2017/TT-BCT: Promulgation 2017-12-28
Annex 9 - Circular No.32/2017/TT-BCT dated 28th Dec 2017 Guide for sample SDS.